couple of questions before i plunge into it - Third Generation F-Body Message Boards

kowboy59 · 02-28-2008, 12:57 AM

ALright i decided to go back on the nitrous plane. I saw this kit here because i can step it up to a 125 shot. Perfect for when i get my big build later down the road. http://store.summitracing.com/partde...5&autoview=sku

Well my question is that now i have an air filter that directly bolts on my TB. Can i put in that tb spacer for it and is that a proper distance for spraying my car? Timing should be what was it 2* for every 50? I forget its been a while since i sprayed.

kowboy59 · 02-28-2008, 02:29 AM

also that one doesnt come with a purge kit does it? If so will any other kit plug in as long as its same piping and all.

Bullydawg · 02-28-2008, 02:42 AM

You may as well get the Nitrous Express kit (white bottle) that is made for out cars. It isn't too much more and it is actually made for TPI. It will be a lot more straight forward, and that is what I plan on doing down the road. I also think the 4th gen kits will work in our cars with little modifications.

kowboy59 · 02-28-2008, 01:23 PM

I have a HSR setup now.

Bullydawg · 02-28-2008, 05:57 PM

I am pretty sure they all go in after the throttle body. I have a super ram in mine. When I decide to get some nitrous, I am going to go with nitrous express. Also, I think their Hp rating are to the wheels, not at the crank like most other kits.