2 quick questions - Third Generation F-Body Message Boards

goes12s · 08-20-2009, 02:13 PM

just 2 quick questions, i have a roller 350 with 190cc aluminum heads 64cc and a victor jr intake, holley 750 carb modded for blowthrough and cr 9.2:1, building my own single turbo manifolds, and t56, mainly a drag car with some street use, and 93 octane

question 1:

what kind of cam should i go with, heads will support up yo .600 lift??i want to rev up to about 6800-7000

question 2:

how laggy will a BW s400 turbo be on this setup at around 8psi to start with?
http://cgi.ebay.com/ebaymotors/Genui...=p4506.c0.m245

thanks in advance

noboostnogo · 08-21-2009, 04:43 PM

mmhmm

goes12s · 08-21-2009, 10:01 PM

Quote:

Originally Posted by noboostnogo

mmhmm

ive spent about 2 hrs trying to find some info on turbo cams and all i got was that i want the lsa to be >112 like 114. what would be a good cam for ~500 to 600hp

and when should i expect to see boost with the s400? 3500rpms???

i would really like some advice from personal experience. thanks in advance

Camarslow · 08-22-2009, 01:16 AM

1. Your best bet is to call a cam company like comp, they should be able to provide the best cam selection advice anyone can give you.

2. iirc a BWs400 turbo should work fine on a 350, I've heard of others using them, please correct me if I'm mistaken.