10-12-2009, 10:19 PM
|
#1 |
| Member
Join Date: Nov 2007 Location: parma,OH
Posts: 110
Car: 91 camaro RS Engine: 350, forged 355 in the works Transmission: 4 speed goin to th400 Axle/Gears: stock 9bolt, 3.27 | cant seem to find this part anywhere
im going with a 400 sbc and i have a twin turbo kit that was for my 350 , now im goin with the 400 and i cant seem to find dished forged pistons for the 400 standard bore only .030 over,
now i no you can get forged flat top pistons but cant you use pistons for a 5.7 or 6.0 inch rod and use them on the stock rods, and get lower compression.
or what can i do th the 400 to get low compression on it with the 60cc heads i have | | |
__________________  5.0slayer |
 
|  |
