Power AdderGetting a Supercharger or Turbocharger? Thinking about using Nitrous? All forced induction and N2O topics discussed here.
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
anybody ever seen one of these before? Seemed to good to be true, I typed in the wrong speelling on Ebay for Accell (Accel) and found this. SBC Turbo manifold. I did a web search and found nothing. Any information on this would be appreciated.
This is true. The Accel manifold was made a long time ago ...altough the is for single turbo ... It's commonly used with a Garret T04b turbo and it is made for carburated engine. The turbo will be on the passenger side and it will be very close to your vavle cover. There's someone in my region that's selling a whole kit for 1000$ CAD ... I have the instruction for the turbo setup since I wanted to buy it but my car is LT1 and it is likely not to fit.
__________________ 93 - LT1 POWERED
Headmans Longtubes, full dual, Hurst V-Matic 2, 2002 4th gen leather seats,Custom dash with Phantom Autometer gauges, GTA molded door panels, Hotchkis Panhard,boxed control arms, Airfoil. Sub frame connectors, 17 X 9.5 ARE rims with 275'' All around, Zexel posi, 3.42 gears.
Is there any way I coud get a copy of those instructions? I bought this thing. Is the setup for a wraparound exhaust like a grand national or is the opening below the flange for a wastegate?
If you have a fax I'll fax it to you ... hmmm...it's a wrap aroung
__________________ 93 - LT1 POWERED
Headmans Longtubes, full dual, Hurst V-Matic 2, 2002 4th gen leather seats,Custom dash with Phantom Autometer gauges, GTA molded door panels, Hotchkis Panhard,boxed control arms, Airfoil. Sub frame connectors, 17 X 9.5 ARE rims with 275'' All around, Zexel posi, 3.42 gears.
Thanks, looks like I just might be going sinclle turbo now on the Camaro after all with this purchase.
I don't have a Fax # though
I was just looking to see of there was a parts sheet, torque instructions or any other specific information on these.
Like I said I tried to do as much research on them before I asked the question and found nothing. your help is appreciated
This is true. The Accel manifold was made a long time ago ...altough the is for single turbo ... It's commonly used with a Garret T04b turbo and it is made for carburated engine. The turbo will be on the passenger side and it will be very close to your vavle cover. There's someone in my region that's selling a whole kit for 1000$ CAD ... I have the instruction for the turbo setup since I wanted to buy it but my car is LT1 and it is likely not to fit.
HI,i was reading a post about the acell turbo set set up and you said that you have the instructions for this unit. I bought one of these from ebay and was wondering if there is any way i could get a copy of what you have? You can email me itor use regular mail and i can throw you something for your trouble. Thanks Anthony.
This is true. The Accel manifold was made a long time ago ...altough the is for single turbo ... It's commonly used with a Garret T04b turbo and it is made for carburated engine. The turbo will be on the passenger side and it will be very close to your vavle cover. There's someone in my region that's selling a whole kit for 1000$ CAD ... I have the instruction for the turbo setup since I wanted to buy it but my car is LT1 and it is likely not to fit.
Here is a fax number you can use if you can 330-533-7293 just put atten. Anthony Phillips thanks again if you can do this.
