[PA] Holley Stealth Ram (mild ported) with fuel rail kit
08-05-2009, 06:17 PM
#1
Holley Stealth Ram (mild ported) with fuel rail kit
Selling my Holley Stealth Ram setup with fuel rail kit and adjustable holley regulator.
Need some money to keep funding the turbo build since its soo close to being finished.
This setup was on my L98 with full bolt ons and allowed me to go 12.95 at 103.8 mph. One of the best bolt ons I've tried.
Put this on my 383 with AFR 195 heads, ported the stealth ram abit to better match AFR head port which is almost same as 1205 gasket. Opened up the runners a touch and rounded off the edges where the plenum sits to smooth airflow into the manifold. Quick port job, plenty of material left and could be opened up and smoothed out more but I stopped. Ran mid 11's on motor and mid higher 10's on a 150 shot with this setup, thats why the runners have abit of darker coating in some areas, not all washed off when i stripped the paint.
This used to be painted red with black plenum but I stripped it clean. I'd say 99.9% of the paint is off, just some areas you can see a touch of red tint. More effort with stripper and powerwasher or wire brush will clean it all up but you cant really see it anyway.
AFPR works fine i've been lucky with this setup as alot seem to fail but it holds fuel just fine. All fittings are included, including a fuel pressure gauge 1/8 NPT fitting. NO GAUGE tho, reused it for my other regulator for new motor. $20 summit gauge will complete the setup. Plenum bolts are included, just not in the picture, forgot to add them in.
There is a slight blemish on the plenum rib on the passenger side front corner where it rubbed on the stock hood. I had poly motor mounts and the hood would touch the plenum and rubbed it alittle flat. Cant get a better pic if needed
Asking $375 shipped Need this gone.
Need some money to keep funding the turbo build since its soo close to being finished.
This setup was on my L98 with full bolt ons and allowed me to go 12.95 at 103.8 mph. One of the best bolt ons I've tried.
Put this on my 383 with AFR 195 heads, ported the stealth ram abit to better match AFR head port which is almost same as 1205 gasket. Opened up the runners a touch and rounded off the edges where the plenum sits to smooth airflow into the manifold. Quick port job, plenty of material left and could be opened up and smoothed out more but I stopped. Ran mid 11's on motor and mid higher 10's on a 150 shot with this setup, thats why the runners have abit of darker coating in some areas, not all washed off when i stripped the paint.
This used to be painted red with black plenum but I stripped it clean. I'd say 99.9% of the paint is off, just some areas you can see a touch of red tint. More effort with stripper and powerwasher or wire brush will clean it all up but you cant really see it anyway.
AFPR works fine i've been lucky with this setup as alot seem to fail but it holds fuel just fine. All fittings are included, including a fuel pressure gauge 1/8 NPT fitting. NO GAUGE tho, reused it for my other regulator for new motor. $20 summit gauge will complete the setup. Plenum bolts are included, just not in the picture, forgot to add them in.
There is a slight blemish on the plenum rib on the passenger side front corner where it rubbed on the stock hood. I had poly motor mounts and the hood would touch the plenum and rubbed it alittle flat. Cant get a better pic if needed
Asking $375 shipped Need this gone.
08-05-2009, 07:19 PM
#3
Senior Member
iTrader: (10)
Join Date: Jan 2009
Location: Edmonton, Alberta.
Posts: 718
Likes: 0
Received 1 Like
on
1 Post
Car: 1988 Pontiac Trans Am GTA.
Engine: 385 stroker sbc
Transmission: TKO600
Axle/Gears: Moser 9" 3.70 Wavetrac
Re: Holley Stealth Ram (mild ported) with fuel rail kit
I am very interested. Does it have baseplate bolts along with the gaskets? (plenum > runners, baseplate > heads).
Also would you ship it free to T5X-5Y4.
Thanks buddy!
Also would you ship it free to T5X-5Y4.
Thanks buddy!
08-05-2009, 11:03 PM
#5
Supreme Member
iTrader: (13)
Join Date: Apr 2005
Location: Not in Kansas anymore
Posts: 7,732
Likes: 0
Received 11 Likes
on
11 Posts
Car: 82 Z28
Engine: 383 SP EFI/ 4150 TB
Transmission: T400
Axle/Gears: QP 9" 3.73
Re: Holley Stealth Ram (mild ported) with fuel rail kit
Great deal; $550 new.
If I didn't already have one would be on it.
Hell, if nobody wants to front up your asking price I might pay the exorbitant shipping to post to me in Australia.
What is the total weight; mine is on the car so I can't weigh?
If I didn't already have one would be on it.
Hell, if nobody wants to front up your asking price I might pay the exorbitant shipping to post to me in Australia.
What is the total weight; mine is on the car so I can't weigh?
08-06-2009, 02:23 AM
#6
Senior Member
Join Date: Feb 2009
Location: Brisbane, Australia
Posts: 848
Likes: 0
Received 14 Likes
on
12 Posts
Car: 1985 Pontiac TransAM
Engine: 400SBC 24x conversion
Transmission: T700r Stage2 Shiftkitted
Axle/Gears: 2.77 9 Bolt
Re: Holley Stealth Ram (mild ported) with fuel rail kit
basterd!
you must have an alert setup for when the words stealth ram appear here :P
if you're willing to put on ebay i'll pay ur asking price plus shipping
you must have an alert setup for when the words stealth ram appear here :P
if you're willing to put on ebay i'll pay ur asking price plus shipping
08-06-2009, 02:45 AM
#7
Junior Member
Join Date: Dec 2008
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87yr. Z28 Camaro
Engine: 305 TPI
Transmission: 700r4
Re: Holley Stealth Ram (mild ported) with fuel rail kit
Hey bro if your are willing to sell the intake and pleneum I would be very pleased to pay what u want for it thank you and god blessed
nj4521@yahoo.com email me if u have anymore parts 4 sale
nj4521@yahoo.com email me if u have anymore parts 4 sale
Trending Topics
08-06-2009, 01:54 PM
#9
Senior Member
Join Date: Feb 2009
Location: Brisbane, Australia
Posts: 848
Likes: 0
Received 14 Likes
on
12 Posts
Car: 1985 Pontiac TransAM
Engine: 400SBC 24x conversion
Transmission: T700r Stage2 Shiftkitted
Axle/Gears: 2.77 9 Bolt
Re: Holley Stealth Ram (mild ported) with fuel rail kit
I never trust anyone that says god blessed in a post, particularly when they say god blessed, not god bless.
Last basterd i bought something off here said he was off to church and then to post my complete TPI setup with xfi ecu......
I'm still waiting.
Last basterd i bought something off here said he was off to church and then to post my complete TPI setup with xfi ecu......
I'm still waiting.
08-07-2009, 12:28 AM
#16
Thread
Thread Starter
Forum
Replies
Last Post
9192camaro
Engine/Drivetrain/Suspension Parts for Sale
16
02-03-2019 12:21 AM
L98GTA87
Engine/Drivetrain/Suspension Wanted
1
08-11-2015 06:55 PM
