[KS] 1991 formula parting out.
#1
1991 formula parting out.
Everything complete with car. So i am parting it out piece by piece. Sorry for all that want the engine and or the transmission. Keeping those for spare parts for my 1986 camaro. The door handles interior and exterior are gone. As i took those out as well. Its a t top the t tops are for sale they are not the orginal though. Some aftermarket and i would say they are in mediocre condition. Has all the clusters and all works. Steering column is out as well since it went in my camaro. I have the 4 tires and rims might sell with a reasonable price. It has working ac all bone stock that will sell to. Anything down to the block willing to sell. Minus a few things the starter the exhaust manifolds. this is a 305 TPI. Willing to sell the TPI. Will take pictures of any parts that they want because the pictures will say a thousand words than description so all just bring on the posts and I will reply in a timely manner. Now mind you all I work and will check the posts. Getting parts out ect.. Give me time and what well do on that is I will pull it out show you pictures of it removed if you want it you buy it NO REFUNDS. The engine is working order so the TPI setup would be great for a swap from carb or from a tbi setup. Any comments or questions will send pm of my phone number and ect.. Promptly. I have some experience into the shipping part what you will see as is. They will be wrapped that are breakables and put fragile on the box to be sent. Thanks all for the review of this.
BTW body parts panels ect.. will sell but will need to find out quotes ect.. for them to ship as they will probably be a bit expensive to send UPS wise. On a side note had a transmission sent to me a while back and costed me to my house 200 dollars shipping. So anything under that weight. If you are local or in Kansas willing to meet halfway to swap cash for parts. For looking at the post.
BTW body parts panels ect.. will sell but will need to find out quotes ect.. for them to ship as they will probably be a bit expensive to send UPS wise. On a side note had a transmission sent to me a while back and costed me to my house 200 dollars shipping. So anything under that weight. If you are local or in Kansas willing to meet halfway to swap cash for parts. For looking at the post.
#4
Supreme Member
iTrader: (4)
Join Date: Jan 2005
Location: Long Island, New York
Posts: 1,048
Likes: 0
Received 1 Like
on
1 Post
Car: 1988 Firebird Formula
Engine: 388 Carb
Transmission: 700R4
Axle/Gears: 4.10
Re: 1991 formula parting out.
I'm interested in the rear bumper and bumper support, but I have a feeling that it might be too much to ship for what the part is actually worth...
#6
Re: 1991 formula parting out.
Okay. Make an offer as long as its reasonable willing to ship. And might work with you on the shipping. I would imagine anything bumpers front bumper fenders ect.. big parts i would almost bet ranging 150 dollars. Since it would clasify as bulk. But heres the deal with everyone. I know how money is tight and i would love to see these parts to come into good use. Give me an offer what you want i will tommorrow get measurements ect.. quotes. and if its more than you want to spend I will work something out on the pricings so it will be affordable. I am not here to make money just to get some money for my camaro for parts. Just pm how much your willing to pay for it. Now the rear bumper is in good condition To keep in mind this car is Hunter green. Minimum rust and a dent on the driverside panel but nothing else front fenders are good as well the bumpers i think on the rear there is a scuff but i will post pics up tommorrow for all the ones that wanted the front and the rear bumpers. and i will quote price for shipping.
Trending Topics
#10
#14
Re: 1991 formula parting out.
Okay today I took pictures and since it was a sunday I was not able to get the shipping costs as of yet I will be working this week so it won't be able to get the shipping quotes out until thrusday when I have a day off I do have pictures for most of the exterior and interior If i missed something contact me in pm and I will send more pictures of the specific item.
#15
Re: 1991 formula parting out.
http://s589.photobucket.com/albums/s...enritetreault/
here is a link to the pictures i took I apologize i couldn't put them all on this page there are 31 pictures. Hope this will get everyones questions answered.
here is a link to the pictures i took I apologize i couldn't put them all on this page there are 31 pictures. Hope this will get everyones questions answered.
#17
Re: 1991 formula parting out.
You want the headlight and motor correct. I will thrusday get all the shipping details for everyone. Considering I can get that in a descent size box i wouldn't say no more than 20 dollars could be even under pm me an offer and will work out the shipping. But let me get exact quote when i get it weighed.
#19
Junior Member
Join Date: Aug 2009
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 Camaro
Engine: LB9
Transmission: 700R4
Axle/Gears: ?
#23
Re: 1991 formula parting out.
Bump. the serpentine system on the car is now Sold. And also i might have the front and rear bumper with the head light and motors sold. There is alot of good parts on this car still that needs to be sold before I junk it. Like driveshaft, the torque arm "i think thats what is it call going from transmission to rearend" Front driverside and passenger side panels are in good condition. I also decided I will be selling MOTOR! TPI. 100 bucks LOCAL ONLY! yes it is a 305 with vortec heads on it. 119k on the motor Ran great. I would of driven this car if i had the title but its not a parts car. So if you have the ambition and time to pull it out its yours 100 bucks. You wont' need to bother with the transmission it will be already out of the vehicle so just the engine mounts and wiring. WILLING TO SELL THE ECM AS WELL 50 dollars shipped.
#26
Re: 1991 formula parting out.
Everything must go. I will be holding on the car until its down to bones or nothing else is salvageable. I have UPS ACCOUNT. So nothing to big or to small to ship. One thing just give me time to ship as I do work. Oct 30 to the November 6th i have vacation. So be prime for all you buyers out there to start asking what you need and so you can get your shipment promptly.
#29
Re: 1991 formula parting out.
Nothing set on the passenger fender. I will be pulling the fender off and getting the weighed. I don't think no more than 50 dollars to ship. Since its and odd thing to ship will have to make a box. so i would say 150.00 but let me double check the weight before i set a price i like to include the shipping so its one lump sum.
#31
Re: 1991 formula parting out.
UPDATE! Okay the front bumper is in alright condition it seems that the car was towed so it is cracked under the front passenger side bumper if you look in the pics it has paint flaking well thats because the bumper had a chain rubbing and cracked it. but over all its a good one if you have yours trashed badly or worse than what i have.
#34
Member
iTrader: (2)
Join Date: May 2001
Location: marietta, ga
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
Re: 1991 formula parting out.
Nothing set on the passenger fender. I will be pulling the fender off and getting the weighed. I don't think no more than 50 dollars to ship. Since its and odd thing to ship will have to make a box. so i would say 150.00 but let me double check the weight before i set a price i like to include the shipping so its one lump sum.
Thanks
Steve
#35
Supreme Member
iTrader: (10)
Join Date: Sep 2000
Location: Moorpark, CA
Posts: 2,376
Likes: 0
Received 138 Likes
on
98 Posts
Car: '91 GTA, '92 T/A Convertible
Engine: GTA: 350 w/Vortec heads, T/A: 305
Transmission: Pro-built 700R4
Axle/Gears: GTA: 3.27, T/A: 2.73
Re: 1991 formula parting out.
I need two items from the car if you still have them. They are:
The third brake light lens/cover (not the whole assy, just the red lens if it isn't melted at all).
The brake line brackets that attach to the strut (like an idiot, I tossed mine on accident last time I R/R'd them).
Let me know what you want for those items shipped to 93245.
-Eldon
The third brake light lens/cover (not the whole assy, just the red lens if it isn't melted at all).
The brake line brackets that attach to the strut (like an idiot, I tossed mine on accident last time I R/R'd them).
Let me know what you want for those items shipped to 93245.
-Eldon
#36
Re: 1991 formula parting out.
yes I do. And the bracket? on the strut located where? I probably have that as well just wondering where it located at? I am pretty sure its not melted and in great shape i will check for you give me a few seconds to look at it.
#37
Re: 1991 formula parting out.
The lens is in perfect condition. One little smudge but its not melted or nothing pics are here to prove.
pictures are front and back of lens. NO cracks. And one small smudge but not really noticeable unless you really look at it. And far as the bracket on the strut the one i see is the one in the driver side on the fender well. Not on the strut unless its inside the tire fender well. Give me little more info so i can track this other part down for you.
pictures are front and back of lens. NO cracks. And one small smudge but not really noticeable unless you really look at it. And far as the bracket on the strut the one i see is the one in the driver side on the fender well. Not on the strut unless its inside the tire fender well. Give me little more info so i can track this other part down for you.
Last edited by berlin305; 10-31-2009 at 04:45 PM.
#38
Member
Join Date: Dec 2003
Location: Pennsyltucky
Posts: 279
Likes: 0
Received 0 Likes
on
0 Posts
Car: '91 Firebird (blown apart)
Engine: *cough*BOAT ANCHOR*cough*
Transmission: Slushbox
Re: 1991 formula parting out.
Still have the 140 mph speedo/cluster assy? Shipping to 19526.
#39
Supreme Member
iTrader: (10)
Join Date: Sep 2000
Location: Moorpark, CA
Posts: 2,376
Likes: 0
Received 138 Likes
on
98 Posts
Car: '91 GTA, '92 T/A Convertible
Engine: GTA: 350 w/Vortec heads, T/A: 305
Transmission: Pro-built 700R4
Axle/Gears: GTA: 3.27, T/A: 2.73
Re: 1991 formula parting out.
Lens looks good. What do you want for it? I don't remember exactly what the bracket looked like. My original went bye-bye a long time ago. I recall seeing it on various pics throughout this sight. Not a huge issue. If you see it, cool. If not, no biggie.
Eldon
Eldon
#41
Supreme Member
iTrader: (10)
Join Date: Sep 2000
Location: Moorpark, CA
Posts: 2,376
Likes: 0
Received 138 Likes
on
98 Posts
Car: '91 GTA, '92 T/A Convertible
Engine: GTA: 350 w/Vortec heads, T/A: 305
Transmission: Pro-built 700R4
Axle/Gears: GTA: 3.27, T/A: 2.73
Re: 1991 formula parting out.
I was thinking closer to $15 shipped for the lens. Tomorrow I'll try to track down a good reference for the brake line bracket.
#43
Re: 1991 formula parting out.
Yes I do. For the whole thing including shipping. I wouldn't part more less than 60 dollars for it thats shipping included. Do you need the panel as well? Meaning the front cover that goes over the cluster assembly.? If so that will be included in the pricing. If not I will drop the pricing a little bit.
#44
Re: 1991 formula parting out.
UPDATE: The 305 HO engine in the car is sold. The 700r4 that was in my camaro is sold as well. Still good parts to sell. Drive shaft, the brake pedal for an automatic that came out of my 86 camaro selling cheap. I have in perfect condition transmission lines that can also be sold IF they are not corroded on the Radiator. Since I am changing out the radiator also it was corroded around the lower radiator hose. Didn't know if it hurt the lines or not but will give more details once i pull that out. The calipers on the firebird are for sale. I have a nice condition center console the lid in good condition no tears. Okay for all that wanted to know about the radio pod that seems to been hacked and where to bolt up the frame for the radio the tabs are broken so up to you i think that won't sell. Just tell me what you need ask drew not selling to much for them. Some parts will be little pricy because of shipping. If you ask the guy that got the serpentine system sold for 75 and shipped was 33 dollars so he got that part real cheap the shipping was the expensive thing.
#45
Junior Member
Join Date: Aug 2009
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 Camaro
Engine: LB9
Transmission: 700R4
Axle/Gears: ?
Re: 1991 formula parting out.
I need the little switch that goes on the hatch motor. Its part number 16604067. Should be right on the top of the assembly with 3 wires going to it.