[KS] (SOLD) Holley Carbs
#1
(SOLD) Holley Carbs
Both carbs are now SOLD! Thanks for looking!
I've got a pair of Holley carbs leftover from a project. They're both used, in unknown condition.
(SOLD!)First is a 80457, it's a 4160 series 600cfm vacuum secondary carb with electric choke. I bought it used, and it's been sitting for at least 3 years. $55 shipped!
The other is (SOLD) a 3310-1, it's a 4150 series 780cfm vacuum secondary carb. I was told it came off a 396. The choke parts have been removed, and the vacuum port covered. One of the mounting ears is broken off, it was like this when I bought it and I've never done anything with it. A new throttle base plate is about $100 new. $55 shipped! SOLD!!!
I accept paypal or US postal money orders. Parts can be picked up in person in Salina KS.
I've got a pair of Holley carbs leftover from a project. They're both used, in unknown condition.
(SOLD!)First is a 80457, it's a 4160 series 600cfm vacuum secondary carb with electric choke. I bought it used, and it's been sitting for at least 3 years. $55 shipped!
The other is (SOLD) a 3310-1, it's a 4150 series 780cfm vacuum secondary carb. I was told it came off a 396. The choke parts have been removed, and the vacuum port covered. One of the mounting ears is broken off, it was like this when I bought it and I've never done anything with it. A new throttle base plate is about $100 new. $55 shipped! SOLD!!!
I accept paypal or US postal money orders. Parts can be picked up in person in Salina KS.
Last edited by Drew; 03-07-2010 at 07:58 PM.
#5
Supreme Member
Re: Holley Carbs
I'll send you a PM anyways, but I have a Rochester on my Black(Fire)Bird it runs well but I am interested in the 4160 maybe both. I assume I would need an adapter.
#14
Re: Holley Carbs
The best shipping I can get on something that heavy is a large flat rate box $15, Paypal takes 3%. That works out to about $28 for a carb that costs $280 new. Holley gets $50 just for an electric choke kit. I'll go $55 shipped just to get rid of it. I can probably get it in a medium flat rate box if I remove the choke and vacuum secondary housing. In that case I could do $50 shipped. Let me know.
#17
Member
Join Date: Jul 2009
Location: Richmond,VA
Posts: 149
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Trans Am, 1986 Fiero SE
Engine: 5.0 H.O., 2.8
Transmission: T5, M4 Muncie
Axle/Gears: 3.73 disc posi, CAVALIER AXLES!!
Re: Holley Carbs
-longwinded bump- If some of the stuff I have on here would sell Id be all over it bro.....you could always donate it to RedRokkits Ride charity foundation ......Ill even pay for shipping.....Dang I need a carb!!!!!
#18
Re: Holley Carbs
I'm pretty sure I gave $50 for it BEFORE I threw a kit in it. I ended up using a Quadrajet instead, then sold the car. I'd love to give it away, but I gotta get something out of it. It's been sitting in a box for the last 3 or 4 years and I really don't need any excuses to ever mess with carbs again. A month ago I had 4 carburetors laying around, i'm down to this 600, and a junk CC Qjet I'll probably throw away, then I'm out of the carb business. I can't wait.
#23
Junior Member
iTrader: (1)
Join Date: Oct 2008
Location: Utah
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86' Firebird
Engine: 350 c.i. swap
Transmission: G-Force T5
Re: Holley Carbs
The only thing that is holding me back is the condition of it. You don't have any idea at all?? I bought an edelcrap this way and it ended up haunting me in the end. If you give me some kind of idea of the condition of it to ease my mind you might have a sell...
#24
Re: Holley Carbs
I can only tell you what I know. If I knew for sure it was a good carb, I'd be asking over $100. A buddy of mine pulled it off an engine with a spun bearing. It sat in his junk pile for about 6 months because he didn't like Holley carbs. I gave him $50, cleaned it up, and threw a kit in it. I was messing with a 267 V8 in a 1980 Malibu. I ran it on the car for a couple of days and then switched to a Quadrajet. It ran better with the Qjet, so that's what was on it when I sold the car. At the time I was thinking the carb was too large for the engine.
Anyway, it's priced as parts or a fancy modern art door stop. It could work just fine or be a boat anchor, I can't say for sure, and it's sold as is, no different then a flea market or swap meet. Used parts are used parts.
Anyway, it's priced as parts or a fancy modern art door stop. It could work just fine or be a boat anchor, I can't say for sure, and it's sold as is, no different then a flea market or swap meet. Used parts are used parts.
Thread
Thread Starter
Forum
Replies
Last Post
Hotrodboba400
Firebirds for Sale
3
12-10-2019 07:07 PM
86CamaroDan
Engine/Drivetrain/Suspension Parts for Sale
2
09-29-2015 10:08 PM
GeneralIesrussi
Tech / General Engine
0
09-03-2015 03:23 AM