South Central RegionBoard for the states of Texas, Oklahoma, and Louisana.
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
i offered to buy it but you said no.... id give 200 for it!!!
383 update.... so i have a 350 2 piece rear main in the shop right now being vatted and decked as well as bored to 4.060. i got my scat pro comp steel crank in and also my scat forged i beams in and am waiting on my probe forged 4 valve relief flat top pistons so he can balance it... im considering edelbrock performer rpm heads as well as intake....
i offered to buy it but you said no.... id give 200 for it!!!
383 update.... so i have a 350 2 piece rear main in the shop right now being vatted and decked as well as bored to 4.060. i got my scat pro comp steel crank in and also my scat forged i beams in and am waiting on my probe forged 4 valve relief flat top pistons so he can balance it... im considering edelbrock performer rpm heads as well as intake....
What cam???
Decked to what? (zero decked?)
What head gasket are you gona run???
Any work on the heads, or just bolt on outa the box???
Just curious as to what you expect with those heads? Do you want it streetable, or all out raw with race gas for the track only. Im just wondering because I hate to see ya get dissapointed with a result that you werent expecting......
its going quick but everything i buy is planned out... im trying to figure out a way to keep a fuel cell full of race gas in my car for nitrous passes...
yup... but i got that figured out... btw.... just converted my tbi to cold air.... i love it
also forgot to mention that the murdered up drivers side quarter panel and drivers side door has been replaced... so shes all purrty again! dont let anyone tell you that a firebird door and a camaro door are the same..... it was a b!tch
__________________ I'm your huckleberry
dang.... i think he wants to race....
Last edited by unionfootball06; 10-07-2009 at 07:38 PM.
hey I don't know if you can do this but just throwin it out that I have a 2000 cbr 600 for sale. let me know if you want info or if its against the rules.
askin 2700 obo for it. has a D&D slip on, 1 tooth smaller front sprocket. Yellow tint wind screen, after market grips turn signals. Rear fender eliminator kit. Also has a brand new tire with less than 500 miles on it since July. All Maintenance done at scheduled intervals including the valves at 16500.
Give me a pm and we can talk.
Last edited by JonnyS; 10-11-2009 at 04:22 PM.
Reason: added some pictures.
okay guys I got some pics up and a few details about the bike. open for q&a and avalable for looks and test rides tuesday wednesday and thursday this week.
update on my build... just got a holley 750 double pumper with mechanical secondaries which has 800 plates on it making it a 780.... also i got my nitrous kit from a guy in claremore... its nx and ill probably be running a 200 shot... this is going to be a fun daily driver :-)
anyone still alive out there? i tought the zombie attack was just rumors but apparently its happening.....
Very much alive man, just got done tonight installing a 4th gen rear end into the Iroc.......went from the 2.77 to a 3.08 gear, and im fixing to buy a 3.73 posi unit from a guy. Even the 3.08 woke it up quite a bit, cant wait to get the posi and gears in it. Will be a totaly different animal.
yup... but i got that figured out... btw.... just converted my tbi to cold air.... i love it
also forgot to mention that the murdered up drivers side quarter panel and drivers side door has been replaced... so shes all purrty again! dont let anyone tell you that a firebird door and a camaro door are the same..... it was a b!tch
that would work!!! where did u find your parts? i wanted to put a nitrous kit on my tbi and that would work and put a fogger nossle in it
i got my carb hat at pep boys but your o'reilys may have it and if you have the part number you can get it from autozone or advance... the tubing is from o'reilys and the rubber connectors are from locke supply... easy job and i love it! it stays awake way longer... after the engine is hot it still pulls like a champ... i just got my 4th gen 30th anniversary seat put in my car and also a cargo cover put on... now im working on an overhead console for my nitrous... im going to have a fuel pressure gauge, an arming light with toggle for open throttle switch, and a purge toggle... only thing is id have to delete my overhead light and i dont know if i really want to do that
The 4th gen rear is awesome, the stance looking at it from behind is just mean as hell looking, the 4th gen rear is like an inch and a half wider on each side than the 3rd gens. Looks sick!!! The install is easy as pie by the way.
I also installed a walbro 255 in the tank the same night, it definety woke the car up a lot more on the big end.
So I just found out that I wont be getting what's left of my uncles totaled 02 ws6. So I am going to pull the 305 out of the car and bore it .30 over, new cam, new heads and probably a new intake and carb. wish me luck to talk the wife into it!
yay for a new car 91cam
i just got new tires on and it really makes my car look mean! next week or so im getting my new carpet and then hopefulllllllly a new dash pad and my interior is done then continue on the 383.... all i have left on that are my heads, cam, and oil pan... im getting kinda nervous and burntout on it.... im trying to finish it but it becomes more and more of a money pit.... i guess after that its paint and im close to done... hows everyone else's ride?
well mine is sitting in the driveway collecting water in the trunk. I need to sell my bike so I can get the car in the garage and start cleaning it out. Other than that nothing.. rear end is in it but still no brakes to the back wheels.
Okay when I get home, I will take some more pictures and get some engine bay pics up for everybody. I'll try and dig up so old pictures too before I started doing anything to it.
well mine is sitting in the driveway collecting water in the trunk. I need to sell my bike so I can get the car in the garage and start cleaning it out. Other than that nothing.. rear end is in it but still no brakes to the back wheels.
like no pressure?? because i will be looking in the future for a ls1 rear, disk and perferably a torsen style diff
so if u dont want/need it... keep me in mind?
__________________
*RIP*(tree)1991 camaro rs l03 tbi.
ultimate tbi,msd coil,hooker shortys,full 3 inch exh., flowmaster,transgo kit,vette servos ,k&n filters,syntec,ebc yellowstuff,now has 87iroc wheelswrapped in bfg rubber all around,turbo iroc hood,jaz race seats,pioneer headunit, infinity 6x9
well the rear end I got is a posi disc system. I love it! the only problem is that all my brake lines were seized up so I can't get the rear brake lines connected to the cars brake lines. I wont be getting rid of the rear or car for that matter any time soon sorry 91camaroRS. The car is my baby and my baby is just getting worn out from not being taken care of by its previous owner. Its getting some much needed R&R.
There is a Yellow Camaro with Black racing stripes I see all the time between Pauls Valley and Norman. I'm not sure if the owner is on here, but I would love to talk to them. It is one sweet looking ride. I love the hood and the spoiler. Anyone knows the owner of this car let me know. I want to see what this thing really has up close.
Hey guys haven't been on in a while. Nice to see there is still a pretty good turnout of Oklahoma guys. Hope everyone is doing good. I have a nose piece and chin spoiler over in the classifieds section if anyone needs one. Trying to clean out the garage of stuff I don't need anymore.
