| Cruise Wire Sleeve
Anyone have a plastic sleeve that goes in the column that protects the cruise wire? I have an 83 column but someone put an 84 cruise stalk (which is the wrong wiring) and crimped those wires b/c it's a tilt column & didn't have the sleeve. Found a good 83 stalk but want to protect it. Not gonna be at the junkyards for a while.
I'm along the eastern loop of the 101 that runs North-South. 
I have new speedo gears (mainly for T-5) I could trade or whatever.
thanks.
__________________
J. Matthew Daugherty
1986 SS with
Engineoriginal L69 long block with: ¤ MAF TPI ¤ 1987 L69 cam ¤ Jet-Hot coated Hooker PN 2050 ¤ stock L69 cat (see-through) ¤ chargedair.com fan ¤
Drivetrain:mechanical g-body clutch linkage, 83 f-body fork, 10.5" / 26spline clutch, 1995 T56, 3.5" aluminum driveshaft, 3.73 factory posi diff.
Chassis
Global West CNR-88-C negative roll kit, Eibach front, Guldstrand rear springs, Praise Dyno Brakes 1LE cryo / slotted rotors on 9C1 spindles & calipers
If you need a PN in a hurry so you can order it and wait 10 days for it to get there instead of buying it locally, you're not in that big of a hurry. | 
