89mulletbird

Anyone got a used drivers side exhaust manifold for sale for a 2.8L?

Need one ASAP in OC area, thanks.

__________________
89 TTA #996 65k miles - 530tq/390rwhp 12.09@107
87 TA 92k miles - 5.0L 5spd

crazy3rdgen

why whats wrong with it.. did a bolt break inside where the Y pipe goes or sumtin..

89mulletbird

Both of the bolts holding the exhaust flange twisted off inside the manifold when I went to drop the exhaust.

I could get them drilled out and re-tapped but would probably cost the same as a used manifold?

crazy3rdgen

just happend to me man i'll have pics of what i did tommorow.. i'll explain now tho.. i dropped my Y pipe to weld up my downpipe cause itd be easier with it disconected then i realized the bolts i broke were built into the the end of the manifolds.. i had to get titanium bits.. drill them out.. then i took a bolt.. cut the head off the bolt, then i welded it back in .. she good.. i'll get ya pics so you understand better tommorow

__________________
2002 SS camaro- Lid, full exhaust, textralia z grip, moser axles, Pst driveshaft, and drs' 12.242 @ 114.32
1998 r/t neon ( daily driver )- 2.4 swap, srt internals, port and polished head, custom intake mani, 60mm tb, srt turbofold & agp wga set at @ 21lbs

89mulletbird

I just went ahead and got a used manifold from House of Camaro. I don't have a good enough drill or bits or tap to do it myself. Going to put new exhaust gaskets and bolts (with anti-seize compound), should solve my horrible leaky noises.

RTFC

I have an extra passenger side manifold but not a drivers side if you ever need another one. I only used it to mock up an EGR fitting onto a set of Hooker Headers that I sold to Fbodtek.