Pyroviking

If anybody can point me in the direction of where to get a reasonably priced 4th gen rear end, I sure would be appreciative.

This ad is not displayed to registered members. Register your free account today and become a member on ThirdGen!

__________________
1985 Trans Am - LG4/5-spd WS6 T-Top - RIP
1989 Trans Am GTA - L98/auto WS6 T-top - parting out
1990 Trans Am - LB9->L98 swap/5-spd WS6 T-Top
1993 Trans Am - LT1/6-spd

TA

I've seen several V8 4th gens in the pick-your-part yards, but you gotta be willing to pull it yourself. If you are going to be choosy about gear ratios, your options diminish substantially.

TA

Pyroviking

Thanks for the tip.

Since the gears in my existing rear end suddenly became nothing but a pile of shrapnel, I'm more interested in getting the car going again than finding the ideal ratio.

z28gsxr

I have one off of a 94 z28. Its a parts car and i was told it has 3.73's on it. Complete from disk to disk. I have not removed it from teh car but can remove it soon.

__________________
91 RS Conv 5spd swap in process
89 Camaro RS 5spd 305 TBI
85 z28 5spd Carb 350********Gone
87 Trans am ttop 5spd 305 TPI****Gone

WestCoastCamaro

Yeah, pick your parts have them, and that Ecology yrad always has a few as well./

kkingsrulee

Yeah, sure you can find a fourth-gen rear end at a "pick-your-part" junkyard, but most are basic non-limited slip, drum brake rear ends from v6's mostly.

So it makes it the same as a '90-'92 third-gen with the same 28 spline axles accompanied by a non-limited slip rear end and drum brakes. It's pretty hard to find something other than that at a junkyard unless you camp out early perhaps or know a good jy.