F/S: 1987 TPI manifold,350 ESC module, valve covers - Third Generation F-Body Message Boards

cleanz_28 · 07-08-2009, 02:52 AM

I have a 1987 TPI manifold, its pretty dirty I was gonna polish it. But eh I moved on. I did start porting the lower part, but again I moved on. I do have the fuel rails and the stock injectors.

I also have a ESC module for a 350 Tpi GM part # 16128261 that I bought of TPI parts, witch I no longer require due to the fact I went back to a 305. Its still new in box.

I also have a stock set of center bolt valve covers of a 1987 F body. I cleaned them but decided to not to use them

80 For the Tpi Manifold and fuel rails and Injectors
80 for the ESC module
40 for the valve covers

Due to the economic times i will accept trades

Also the price are not set in stone for the Manifold or the valve covers since they are used.

I just want to pay back the DMV so I can drive on the street.

contact me at josemnava@charter.com

Dyno Don · 07-08-2009, 07:10 PM

Except for the fuel rails and inj., what you have is a few circular file items.

That's what I have done with a lot of them.

Go ahead bash me if you want, but you might as well know the truth.