I have two seats from a '87 camaro. There red and not in the greatest shape. $20 obo for both.
Also a camaro aircleaner assembly with everything except that line that goes to your carb, and maybe the wingnut and such to hold it down (can't find but know i saw it somewhere). $20 obo
Accel cap and rotor kit unused. Its a female type cap and rotor. Mine is male so it wouldn't fit. Never used but is out of box though. $10 obo.
If you take it all i'll lower it to $40 total.
Features of this car:
31 spline Moser 9”, with a posi, 3.50 gears (3:73 aftermarket gears included with sale)
Solid heim joint suspension (Herb Adams) and custom sub frame connectors welded in
90/10 front drag struts
T56 6-speed borg-warner transmission
Hydraulic clutch linkage
Steel Centerforce Flywheel, Ram 900 disc
Accel gen-5 programmable fuel injection, single plane spyder EFI intake, 1000CFM TB
Accel DFI integrated NOS Super Power Shot wet flow plate 75-175 hp nitrous system
Brand new just released in box Edelbrock Victor EFI intake included with sale
355 short block balanced with forged pistons (very well worn enough to need replaced soon)
Fresh modded Dart heads with Harlan sharp rockers, and comp valve train
MSD-6AL
True Dual 3” exhaust with “quicky” dumps and hooker “shortys”
Fresh 28 x 10.5 ET streets included
Car weighs 2800 pounds without any lightening yet!
dont forget to watch the movie there of it running at bandemere in that link
car located in cheyenne
he is selling it for $3000 (considering all the parts its a steal!)
I've got a set of TPI heads for you what will you give me for them?
----------
Hey Tom if he decides to part it out let me know I"m intrested in a few of the parts I wish I had the money for the whole thing I'd be all over it. That's a killer deal
Last edited by 91RamAir Formula : 12-07-2006 at 06:25 PM.
Reason: Automerged Doublepost
I've got a set of TPI heads for you what will you give me for them?
----------
Hey Tom if he decides to part it out let me know I"m intrested in a few of the parts I wish I had the money for the whole thing I'd be all over it. That's a killer deal
Do they need a rebuild or can I slap them on and go.
40 bones ok?
ok first the heads are good they work fine but I would probably rebuild them just for good measure they are stockers with about 130K on them. price sounds perfect.
And Brandon Santa needs gas money for delivery's like that, I paid 200 for them and they were used for about a year and a half. I'd like to get half that
ok first the heads are good they work fine but I would probably rebuild them just for good measure they are stockers with about 130K on them. price sounds perfect.
And Brandon Santa needs gas money for delivery's like that, I paid 200 for them and they were used for about a year and a half. I'd like to get half that
Anyody interested in complete swap setup? The trans is a fresh, upgraded, full manual valve body TH400 out of a BB truck, the valve body is an aftermarket unit- not a converted OEM piece. The convertor is a billet NOS/blower convertor from Art Carr with ballooning plates and rated to 1000+ hp. Also includes Hurst crossmember, Cheetah SCS shifter, braided AN lines, etc. Lot more details but don't want to type a book about it. All this stuff is 99.9 percent new, no junk. Will sell the trans only or complete setup. Price and payment terms are open for dicussion
2800. It's a custom built 10" convertor, billet steel cover, 4130 hub, heavy duty sprag, etc. Art Carr calls it their "TH350/TH400 H/D Super Torque" convertor. Forgot to mention that I have a custom built chromoly driveshaft for this setup. Like I said, the price is negotiable. Somebody is going to get a great deal cuz I got an azzload of money in all this stuff. If you're seriously interested I can PM you my number and we can talk more about it.
Hey guys, I need two things - the first is a real short length of header-wrap fabric (maybe two feet or so), and the second is the plastic "hamster wheel" fan that's found inside the heater core box assembly - I need the one for NON-A/C cars.
I need the header wrap so that I can try to cushion my exhaust from banging against my pass.-side SFC, and the fan so that I can get all of that put back together again.
I'm willing to pay a reasonable amount for each.
UPDATE(2/13/2007) - I've gotten the fabric, & just may have a line on the fan, but still interested, just in case...
Last edited by V8Rumble : 02-13-2007 at 11:54 PM.
Reason: Updated info
I still have a 2400 stall for the 700R4 tranny. Made by Quality Custom Converters out of Rochester, NY. Will trade or take cash. Never ran it, just put it in then right back out to have the tranny rebuilt. So if any of you locals are pulling your tranny and want to upgrade let my know.
Will trade for:
Aluminum driveshaft
After market LCA's or panhard bar
$100
Still has waranty.
It does not look like anyone has posted here for a while.
These are some of the parts I need. How much I buy will depend on the cost. Not looking for junk parts for I have those already ha,ah. Rear Diff Complete w/possi set up for disk brakes, 700R4 transmission, A/C delete heater box, dash pad, front seats. My list goes on but this is most of the important stuff, And please dont beat me up!!!
Last edited by mark wells : 03-06-2007 at 10:34 PM.
Reason: left something out
If anybody has a shift cable for a third gen (83 Z28 Crossfire) I really need one!! I bought an aftermarket cable but where it snapped in to the round holder wouldn't fit as it was just a tad smaller than a GM original and it flopped around and I still couldn't shift correctly and ended up killing the "new" cable !! So...I'd love to find a used GM original and I know that that will fit properly!!
Today my Edelbrock BBK 89-92 TPI 58mm TB, 1206 gasket port matched edelbrock lower, and my Accel SuperRam went up for sale. $1700 for everything, or you can bid for them and get them much much lower in my auctions on ebay under the same name I use here (no caps)
Just wrap them up and tell Santa to bring them to my house on his way - NO FRIEGHT!
