Sponsored VendorsConnect with our Sponsored Vendors that sell the parts you need for your Third Gen Camaro or Firebird. Show your support for our vendors by offering feedback and telling friends about their services.
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
Part Number: 1AZTM00001 This GM replacement trunk pull down motor motor is among the highest quality replacements on the market. It's just what you need to get your vehicle in good working order again!
This new, aftermarket replacement pull down motor features the following specifications:
Universal replacement for both round and rectangular motors
Direct bolt on replacement
Replaces dealer part number: 16608837
Fits vehicles with a 2 wire connector
Built to strict quality control standards
Includes motor, drive shaft with worm gear, and housing as shown
Replace your broken or worn out trunk pull down motor now with this great fitting alternative. It makes a great replacement and has good cost savings over a dealer unit.
Re: Pontiac Firebird Hatch Pull Down Motor 1986-92
Tony, That motor works for 86-early 91 model years only. The design was changed in the middle of the 91 model year. It is easy for customers to distinguish between the two designs. 86-early 91 have a metal frame where it attaches to the body with 3 bolts. Mid 91-92 have a tan-colored injection molded frame where it attaches to the body with 3 bolts.
Lon
__________________ 90 RS Convertible "cruiser"
88 Firebird Formula "racer"
88 Iroc-Z Resto-Project car "paperweight"
Re: Pontiac Firebird Hatch Pull Down Motor 1986-92
Quote:
Originally Posted by lonsal
Tony, That motor works for 86-early 91 model years only. The design was changed in the middle of the 91 model year. It is easy for customers to distinguish between the two designs. 86-early 91 have a metal frame where it attaches to the body with 3 bolts. Mid 91-92 have a tan-colored injection molded frame where it attaches to the body with 3 bolts.
Lon
Thanks Lon, We had checked this a while ago with the manufacturer and were told that it would fit up to 92,however after researching this today with the manufacturer it looks like they did find that to be incorrect,and didn't inform us of the year change.
