what torque arm bushing do i need to use with the B&M TH-350 changeover kit. The stock one from my 1984 camaro 5-speed doesnt sit against the torque arm and it bangs against the bracket and is annoying. Does anybody have this kit and what bushing did they use. Thanks.

i think b&m gives you the pn i nthe instructions don't they?

my fault, it is a hurst kit, wouold the p/n from b&m still work? if so what is it?

I have the B&M kit on mine. I just ordered a poly bushing made by energy suspension. I used one of the later model ones, not the '82-'83 torqque arm bushing they make but one of the newer ones that differs depending on which way the torque arm lip faces. Mine fits REAL tight. Had to use a "c" clamp to squeeze the thing enough to run the bolts through. The bushing is only $20 and poly on top of that so just a suggestion.

HTH,

what is the lip?

The lip is on the top and bottom edge of the torque arm. So if you were looking at the torque arm bushing from the rear it will have a cut in it for the torque arm. I'll try and attach a pic from energy suspension's web site for ya. Well this is from summit's site. In the upper right corner you can see the end of a torque arm. It makes kind of an "m" shape. Which way that faces (either towards the driveshaft or away from it) determines which part you need.