Suspension / ChassisQuestions about your suspension? Need chassis advice?
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
So its takin me longer to get my new rear than I thought. I was looking at why my rear right wheel wobbles and I dont see anything wrong. Im guessing the axel is warped. Idk. I was wondering should this have any play in it? I can wiggle it a little. The plate that holds the studs.
This ad is not displayed to registered members. Register your free account today and become a member on ThirdGen!
__________________ [/SIGPIC]Wesley
Sponsored Links
Registered users do not see this ad. Click here to register for free!
Weeping any fluid on the back side? If so, the seal and bearings are probably shot--and if they're shot the axle probably is too, especially with that wobble. For general info, you might consider the following link:
Well i kinda had the same problem but i found out my spider gear was cracked. i changed it. and boom problem solved! just a suggestion.
__________________ 1986 Camaro Iroc-Z 350 TPI Corvette motor 700r4 trans, BMR strut tower brace,BMR adj.Panhard Rod,Energy Sway Bar links,Eibach Pro Kit,J&M street lower control arms,Accel Distributer,wires.Blacked out all lights.5% Limo tint all the way around.
i have a wobble too, after i burnt off the rear wheels with burnouts, they had a bubble to them, so i drove it home and changed it out, well after i changed the wheels and tires to a pair that have BRAND NEW tires and just got balanced, the car wobbles. usually not noticable under 40. it seems to be the front but someone disagreeed and said it was the back.... ideas.
__________________ 1987 Chevy Camaro IROC-Z, primer with t tops, 305 h.o. rebuilt with tpi and chipped for sale
1992 Chevy Camaro RS, black with t tops, 305 tbi,
98 corvette wheels, 8.5 mm wires, msd coil so far