Suspension / ChassisQuestions about your suspension? Need chassis advice?
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
I just ordered the Spohn tubular k-member and a-ams with the spring pocket so I can reuse my brand new Eibachs and KYBs that have less then 1,000 miles on them. I've been waiting for this upgrade for 2 years! I can't wait.
Anyway, is there anything else I'm missing for the install? I presume it will all be a bolt in swap right? I'm figuring I'll use a cherrypicker to hold the engine up. Just gotta figure out where to put the jack stands since my SFCs don't go that far forward...
__________________ www.TheFoat.com/92GTA1992 Trans Am GTA SLP: GMPP optioned "SLP Performance Parts Package" GTA, 220K Miles, Dark Jade Gray Metallic, LB9, 4L60, T-Tops, and Gray Leather. Documentation includes Window Sticker, Factory Invoice, Etc.
had a shop install mine over the weekend, although i did help a bit. having the tools and lift helped out tremendously. its definitely more of a job then i initially thought it would be. Some rusty bolts and getting the springs in the perches were the biggest problem. overall happy with the look, weight loss, and drive ability. although my front end lifted up about 1/2" after the install, wasn't too happy about that good luck with the install
had a shop install mine over the weekend, although i did help a bit. having the tools and lift helped out tremendously. its definitely more of a job then i initially thought it would be. Some rusty bolts and getting the springs in the perches were the biggest problem. overall happy with the look, weight loss, and drive ability. although my front end lifted up about 1/2" after the install, wasn't too happy about that good luck with the install
that could be an issue with spring indexing. Or drive it for a while and see if it settles. If not, and if it really bothers you, trim your springs a little.
