Suspension / ChassisQuestions about your suspension? Need chassis advice?
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
Since i have no engine i took out my k-member a few weeks ago to prepare it for when the new engine arrives. I picked up new bolts and am almost finished with it, but one factor remains...i don't know how much to torque the bolts. Does anyone know? I've searched here on TGO, google, and the factory service manual with no results.
Thanks in advance!
-Mark
__________________ 1988 Trans Am GTA
Flame Red Metallic, blown up 5.0L/305 Cid (LB9), 350 on the way,T-tops, 700-R4 trans (MD8) soon to be WC T-5, WS6, 4 wheel disc (soon to be 1LE set up), 16" GTA gold diamond spoke wheels, BFG KDWS, digital dash, borg-warner 9-bolt 3.27 limited slip differential, 52mm Holley throttle body, PREMIUM GAS ONLY (93 octane), dynomax exhaust, K&N air filter, AC delco stock plugs and wires, AC delco stock oil filter. 36mm front sway bar (stock), 24mm rear sway bar (stock), ES polyurethane front sway bar endlinks, spohn greaseable polyurethane front sway bar bushings, KYB GR-2 struts, KYB gas-a-just rear shocks, more mods to come.
when i did mine i just use a 1/2 inch gun and went till it stopped that should be plenty to keep it in there and the bolts are big so you shouln;t have any problem with breakage
__________________ 1988 Trans Am GTA
Flame Red Metallic, blown up 5.0L/305 Cid (LB9), 350 on the way,T-tops, 700-R4 trans (MD8) soon to be WC T-5, WS6, 4 wheel disc (soon to be 1LE set up), 16" GTA gold diamond spoke wheels, BFG KDWS, digital dash, borg-warner 9-bolt 3.27 limited slip differential, 52mm Holley throttle body, PREMIUM GAS ONLY (93 octane), dynomax exhaust, K&N air filter, AC delco stock plugs and wires, AC delco stock oil filter. 36mm front sway bar (stock), 24mm rear sway bar (stock), ES polyurethane front sway bar endlinks, spohn greaseable polyurethane front sway bar bushings, KYB GR-2 struts, KYB gas-a-just rear shocks, more mods to come.
