10-01-2009, 12:46 PM
|
#1 |
| Supreme Member
Join Date: Mar 2007 Location: Raleigh, NC
Posts: 1,532
Car: 1988 Flame Red Trans am GTA Engine: Forged 355 4 Bolt, FIRST TPI Transmission: built 700r4/vette stall Axle/Gears: ls1 torsen 3.42 gear | question about my J&M street lca's
| i just got my aftermarket lower control arms.... everthing is in pieces... no big deal its easy to put them together.... but my question is do i need to grease everything like the bushings and metals pins before i put them together... they dont have grease fittings so ima grease them. can i use lithium grease because i have a big tube of that and i can lube everything up... but how much do i put on there..... any info would help...thanks.. | | |
__________________ Forged 355 4 bolt, FIRST injection TPI, L98 headed, Hotcammed engine  Full Suspension, Lowered, probuilt/Stalled 700r4,LS1 3.42 torsen braced/girdled rear end  want: koni yellows, moser 9 inch, afr 180 heads, Danas road race 700r4 and vigilante 2800 stall http://www.thirdgen.org/techboard/vb...=view&id=62362 |
 
|  |
