Suspension / ChassisQuestions about your suspension? Need chassis advice?
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
what are you trying to buy? The spindle/knuckle is the large cast piece that the rotor, strut, brakes ect bolt to.
Why do you need new ones? they rarely go bad. If you need different ones, your best bet is a junkyard/ebay/classifieds. New OEM ones are retarded expensive
__________________ "with a big enough hammer, anything is possible"
"The one who dies with the most tools wins!"
yea i just need a right one because it got bent when some one decided to hit the side of my car i took it to an alinment shop to see what needed to be done and they said over 600 for just the steering knuckle ball joints and idler arm so know i am trying to find a used one on the internet found all the other stuff for cheap just need the ball joint remover tool and the knuckle and it should be good as before
hi there, i need to get two spindles as im about to build a big brake/brembo conversion,,,, i need to know, apart from abs, 1le etc ,are they all the same if you fit them in pairs. im about to borrow some from an '85 car to put on to my'91. what you guys reckon????????????
hi there, i need to get two spindles as im about to build a big brake/brembo conversion,,,, i need to know, apart from abs, 1le etc ,are they all the same if you fit them in pairs. im about to borrow some from an '85 car to put on to my'91. what you guys reckon????????????
Bolt-up.
JamesC
__________________ "There are more things in heaven and earth, Horatio, / Than are dreamt of in your philosophy." Hamlet
