Sphon rear coilover vs Wolfe Mini spring (for minitub install)
#1
Supreme Member
Thread Starter
iTrader: (2)
Join Date: Feb 2005
Location: West Warwick RI, postal code: 02893
Posts: 4,337
Received 55 Likes
on
41 Posts
Car: Building LS3, T56 Z28
Engine: LS3
Transmission: T-56
Axle/Gears: Moser/ 4.11
Sphon rear coilover vs Wolfe Mini spring (for minitub install)
When adding minitubs, you need to change from a standard rear coil spring to something smaller.
Spohn makes a rear coilover that is around $600. (inlcudes everything)
Wolfe sells a smaller spring and mount that cost around $180 (no shocks)
I already have some KYB AGX shocks that I would like to use so the Wolfe setup is attractive.
Can anyone think of a good reason why the coilover would be the way to go over the Wolfe setup?
Thanks for any advice.
Spohn makes a rear coilover that is around $600. (inlcudes everything)
Wolfe sells a smaller spring and mount that cost around $180 (no shocks)
I already have some KYB AGX shocks that I would like to use so the Wolfe setup is attractive.
Can anyone think of a good reason why the coilover would be the way to go over the Wolfe setup?
Thanks for any advice.
#2
Supreme Member
iTrader: (14)
Join Date: Aug 2006
Location: Central NJ
Posts: 12,650
Likes: 0
Received 44 Likes
on
42 Posts
Car: 86 Trans Am, 92 Firebird
Engine: 408 sbc, 3.1L of raw power
Transmission: TKO600, T5
Axle/Gears: Moser 9", 3:70 trutac, 3:23 torsion
Re: Sphon rear coilover vs Wolfe Mini spring (for minitub install)
No, use the Wolfe kit
#3
Supreme Member
Thread Starter
iTrader: (2)
Join Date: Feb 2005
Location: West Warwick RI, postal code: 02893
Posts: 4,337
Received 55 Likes
on
41 Posts
Car: Building LS3, T56 Z28
Engine: LS3
Transmission: T-56
Axle/Gears: Moser/ 4.11
Re: Sphon rear coilover vs Wolfe Mini spring (for minitub install)
So you are refering to the Wolfe mini spring kit? I just got off the phone with the tech guy at Wolfe and he said if you can, run a coilover. I reminded him that they don't sell one for our cars and he said to call back tomorrow at lunch time, becuase if it is just a shock/spring that runs straight up and down, he should be able to offer something, and a lot cheaper than spohns kit.
So we will see. Still going to pick up the minitub from him though.
So we will see. Still going to pick up the minitub from him though.
#4
Senior Member
iTrader: (2)
Join Date: Jan 2003
Location: MN
Posts: 721
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1982 Camaro
Engine: 555 BBC
Transmission: TSI Glide
Axle/Gears: Aluminum Moser 3.89
Re: Sphon rear coilover vs Wolfe Mini spring (for minitub install)
Spohn's kit is over priced. You can find coil overs with a stud and eyelet from Afco with standard valving fairly reasonable. All that you need to do is reinforce the upper shock mount area.
#5
Supreme Member
Thread Starter
iTrader: (2)
Join Date: Feb 2005
Location: West Warwick RI, postal code: 02893
Posts: 4,337
Received 55 Likes
on
41 Posts
Car: Building LS3, T56 Z28
Engine: LS3
Transmission: T-56
Axle/Gears: Moser/ 4.11
Re: Sphon rear coilover vs Wolfe Mini spring (for minitub install)
I agree, I feel like that should be easy enough to do. Just want to make sure I get the right shock length and spring.
#7
Supreme Member
Thread Starter
iTrader: (2)
Join Date: Feb 2005
Location: West Warwick RI, postal code: 02893
Posts: 4,337
Received 55 Likes
on
41 Posts
Car: Building LS3, T56 Z28
Engine: LS3
Transmission: T-56
Axle/Gears: Moser/ 4.11
Re: Sphon rear coilover vs Wolfe Mini spring (for minitub install)
Why? How much would that setup cost?
Trending Topics
#8
Supreme Member
iTrader: (56)
Re: Sphon rear coilover vs Wolfe Mini spring (for minitub install)
QA1 makes a bolt in coil over for the 3rd gen (rear)
starts off in the $500 for every thing.
they make 5 or 6 kits with sof/med/firm springs
singl or double adjustable shocks just did the double on mine.
better then the old weld in set up sphon selling.
summit list them drop ship with them from QA1 takes about 3 days
MY set up was $700
i know summit has 1 in stock now(soft springs 130lb rate) still better then OEM z28 spring for a 92.
http://www.summitracing.com/search?S...d=HAL-RCK52332
$549.97
http://www.summitracing.com/search?keyword=RCK52327
qa1 info
http://www.qa1.net/qa1_motorsports/d...sion-kits.html
starts off in the $500 for every thing.
they make 5 or 6 kits with sof/med/firm springs
singl or double adjustable shocks just did the double on mine.
better then the old weld in set up sphon selling.
summit list them drop ship with them from QA1 takes about 3 days
MY set up was $700
i know summit has 1 in stock now(soft springs 130lb rate) still better then OEM z28 spring for a 92.
http://www.summitracing.com/search?S...d=HAL-RCK52332
$549.97
http://www.summitracing.com/search?keyword=RCK52327
qa1 info
http://www.qa1.net/qa1_motorsports/d...sion-kits.html
Last edited by articwhiteZ; 02-26-2014 at 10:29 PM.
#9
Supreme Member
Thread Starter
iTrader: (2)
Join Date: Feb 2005
Location: West Warwick RI, postal code: 02893
Posts: 4,337
Received 55 Likes
on
41 Posts
Car: Building LS3, T56 Z28
Engine: LS3
Transmission: T-56
Axle/Gears: Moser/ 4.11
Re: Sphon rear coilover vs Wolfe Mini spring (for minitub install)
Very interesting. I thought whatever Spohn was welling was the only QA1 option.
Still not happy at the price. (just bought a house).
My car is just going to be on the street, do you guys think the wolfe mini spring would be fine for me? Or is it really worth the extra cash to go coilover? I know coilover is ideal, but what is the real point if I never plan on adjusting my right height much and just want to drive to car shows and have some fun on the highway every now and then...
Still not happy at the price. (just bought a house).
My car is just going to be on the street, do you guys think the wolfe mini spring would be fine for me? Or is it really worth the extra cash to go coilover? I know coilover is ideal, but what is the real point if I never plan on adjusting my right height much and just want to drive to car shows and have some fun on the highway every now and then...
#12
Supreme Member
Thread Starter
iTrader: (2)
Join Date: Feb 2005
Location: West Warwick RI, postal code: 02893
Posts: 4,337
Received 55 Likes
on
41 Posts
Car: Building LS3, T56 Z28
Engine: LS3
Transmission: T-56
Axle/Gears: Moser/ 4.11
Re: Sphon rear coilover vs Wolfe Mini spring (for minitub install)
They are exactly the same. Kits that they have are the same as us.
#13
Supreme Member
Thread Starter
iTrader: (2)
Join Date: Feb 2005
Location: West Warwick RI, postal code: 02893
Posts: 4,337
Received 55 Likes
on
41 Posts
Car: Building LS3, T56 Z28
Engine: LS3
Transmission: T-56
Axle/Gears: Moser/ 4.11
Re: Sphon rear coilover vs Wolfe Mini spring (for minitub install)
Think I am going with the wolfe spring. Price is just too attractive. I have to spend big bucks other places. (engine dyno, procharger bracket and tentioner, etc...)
#14
Supreme Member
Thread Starter
iTrader: (2)
Join Date: Feb 2005
Location: West Warwick RI, postal code: 02893
Posts: 4,337
Received 55 Likes
on
41 Posts
Car: Building LS3, T56 Z28
Engine: LS3
Transmission: T-56
Axle/Gears: Moser/ 4.11
Re: Sphon rear coilover vs Wolfe Mini spring (for minitub install)
406TPI, can you post a pic of your rear setup? I want to see how you installed the spring perch, or at least describe it please.
#16
Supreme Member
Thread Starter
iTrader: (2)
Join Date: Feb 2005
Location: West Warwick RI, postal code: 02893
Posts: 4,337
Received 55 Likes
on
41 Posts
Car: Building LS3, T56 Z28
Engine: LS3
Transmission: T-56
Axle/Gears: Moser/ 4.11
Re: Sphon rear coilover vs Wolfe Mini spring (for minitub install)
406, did you ever get those pics?
#17
Supreme Member
Thread Starter
iTrader: (2)
Join Date: Feb 2005
Location: West Warwick RI, postal code: 02893
Posts: 4,337
Received 55 Likes
on
41 Posts
Car: Building LS3, T56 Z28
Engine: LS3
Transmission: T-56
Axle/Gears: Moser/ 4.11
Re: Sphon rear coilover vs Wolfe Mini spring (for minitub install)
406TPI, I still want to see your setup!
#19
Member
iTrader: (2)
Join Date: Sep 2006
Location: Fort Hood, Texas
Posts: 340
Likes: 0
Received 1 Like
on
1 Post
Car: 1991 Camaro Z28
Engine: 2002 SS LS1
Transmission: 6 speed
Axle/Gears: Auburn 3.42
Re: Sphon rear coilover vs Wolfe Mini spring (for minitub install)
I had the mini coil kit installed when I did my tub. The shop put the upper mount at an angle. Sounds stupid but my springs angle forward going up. My point basically is check that if you get someone to install the mini tub for you. I didnt notice until taking the tire off. I am in Indiana now and the shop is in California. Took it to a couple of shops and they said it wouldnt affect performance but it just bugs me not being right.
#20
Supreme Member
iTrader: (15)
Re: Sphon rear coilover vs Wolfe Mini spring (for minitub install)
LoOKs simular to the a
Spohn kit but the spring support has the bolt welded to the brace and then tabs for the upper shock mount. Spohn's kit has the brace seperate and the stud goes through the bracket/spring support and bolts through the stock rear shock hole the same way. So they both accomplish the same thing. So what makes the UMI kit bolt on in the spring bucket area compared to spohns?
Thread
Thread Starter
Forum
Replies
Last Post
sailtexas186548
Engine/Drivetrain/Suspension Parts for Sale
10
08-26-2015 03:32 PM