ISUcyclones3

I just replaced tie rods, centerlink, ball joints, and idler arm on my 91 Z28 convertible with Moog parts. Tires are 245/50/16 and are the recommended tire size the door jam suggests. The alignment is dead on, but now when I get near full lock the front tires feels like it's sliding and the tires rub on the sway bar and inner fender. Any suggestions on why this is happening? Never happened before my new parts.

Camber +.2
Caster +4.8
Toe +.01

Stauf

iTrader: (2)

Same thing was happening to me. Turned out my spindle was bent. Check that.