Home Register FAQ Members List Photo Gallery Garage Search Today's Posts Mark Forums Read Vendor Directory


Go Back   Third Generation F-Body Message Boards > Tech Boards > Suspension / Chassis
Reload this Page NEED HELP bY TOMMOROW!!!!! Spindels Simple!

Suspension / Chassis Questions about your suspension? Need chassis advice?

Welcome to ThirdGen.org!
Welcome to ThirdGen.org.

You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!


Reply
 
Thread Tools
Old 01-09-2002, 10:51 PM   #1
Senior Member
 
Join Date: Jul 2000
Location: Naperville, il usa
Posts: 1,686

Classifieds Rating: (0)
Send a message via AIM to FiReBReTHa Send a message via Yahoo to FiReBReTHa
NEED HELP bY TOMMOROW!!!!! Spindels Simple!
ok guys,

thanx for the help, its the bearings, well family helped and one thread got stripped, i have a 91 Pont Firebird with a 305


the Donor car is a "up-to-89" Trans Am with a 305. excecpt... i remember reading on the inside on the dash, performance suspension???

Anyways, i snagged off one Spindel attatched with shock. now...

are they the same spindels????????? let me know i wanna finish the car by morrow if possible...

thanx guys...
This ad is not displayed to registered members.
Register your free account today and become a member on ThirdGen!
__________________
91 FireBird 305 V-8
Edelbrock Catback, Optima Yellow Top, Tsunami Power Top, Custom Alarm. Fourth Gen Console. Info In Sig Link, Only Four cupholders.



FiReBReTHa is offline vBGarage Page   Reply With Quote
Sponsored Links
Registered users do not see this ad.
Click here to register for free!
Old 01-10-2002, 12:30 AM   #2
Senior Member
 
Join Date: Mar 2001
Location: LONGVIEW TX . USA
Posts: 953

Classifieds Rating: (0)
yea they are the same spindle as far as I know
poncho9789 is offline vBGarage Page   Reply With Quote
Old 01-10-2002, 04:56 AM   #3
Senior Member
 
Join Date: Feb 2000
Location: Midlothian,VA. 23112-6108
Posts: 1,453
Car: 1982 Z-28
Engine: 5.0 w/ Holly carb
Transmission: TH-700R4

Classifieds Rating: (0)
All '82-'92 F-body spindles will fit (exept 1LE).
__________________
82 Z28- 383 roller w/Vortec heads Edelbrock Performer Vortec intake, Edelbrock Q jet, serpentine belt drive.TH700R4 w/B&M holeshot 2000 converter,& megashifter.1LE front brakes, 9bolt 3.27 w/1LE rear brakes.Aluminum driveshaft,boxed rear susp. poly everything, IROC swaybar+wonderbar and steering box. Spohn subframe connectors. 70mph@2200rpm ASE Master Tech plus L2
also Latest project car,'86 IROC stock 305TPI hit on left side,but not too bad ( now repaired and equipped with the 1LE brake system). Also 1990 IROCZ 5.0 TPI 5 speed (drive train has 150 miles since new), and another 1990 IROCZ 5.7 G-92 etc., and yet another 1990 IROC-Z, red w/flames, and 1988 IROC-Z convertible, red w/59,000 miles.

www.andyz28.com
ANDYZ28 is offline vBGarage Page   Reply With Quote
Old 01-10-2002, 09:46 AM   #4
Senior Member
 
Join Date: Jul 2000
Location: Naperville, il usa
Posts: 1,686

Classifieds Rating: (0)
Send a message via AIM to FiReBReTHa Send a message via Yahoo to FiReBReTHa
JUSSSSSSSSSSSSSSSSSSSST


In case, how do i recognize 1LE?

Its got a FAT sway bar i think im going to Yoink!
new poly bushings i think, Theyre BLUE! AZUL!


lol, oh well.... ok, i gotta yank the shock off the other side because i yanked the spindel schock/ so it will be unbalanced with the car....


until i get KYB's from everyones recommendation.

My CAR MUST RUN!!! lol, i miss it, plus i got a new toy you guys gotta check out, !!
__________________
91 FireBird 305 V-8
Edelbrock Catback, Optima Yellow Top, Tsunami Power Top, Custom Alarm. Fourth Gen Console. Info In Sig Link, Only Four cupholders.



FiReBReTHa is offline vBGarage Page   Reply With Quote
Old 01-10-2002, 09:26 PM   #5
Senior Member
 
Join Date: Feb 2000
Location: Midlothian,VA. 23112-6108
Posts: 1,453
Car: 1982 Z-28
Engine: 5.0 w/ Holly carb
Transmission: TH-700R4

Classifieds Rating: (0)
Review this massive post http://www.thirdgen.org/messgboard/...TML/001248.html
It has pictures of the stock vs 1LE spindles.

You will never (almost never) find a 1LE spindle in a junk yard.
ANDYZ28 is offline vBGarage Page   Reply With Quote


Reply

Go Back   Third Generation F-Body Message Boards > Tech Boards > Suspension / Chassis
Reload this Page NEED HELP bY TOMMOROW!!!!! Spindels Simple!
« STB or SFCs? | drive and driven gears »

Tags
1le, spindles
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

 

1982 Camaro '82 || 1983 Camaro '83 || 1984 Camaro '84 || 1985 Camaro '85 || 1986 Camaro '86 || 1987 Camaro '87 || 1988 Camaro '88 || 1989 Camaro '89 || 1990 Camaro '90 || 1991 Camaro '91 || 1992 Camaro '92


All times are GMT -5. The time now is 11:07 PM.

Contact Us - ThirdGen.Org - Advertising - Privacy Policy - Terms of Use - Jobs - Top

Powered by vBulletin® Version 3.7.5
Copyright ©2000 - 2010, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.2.0
All content copyright © 1997 - 2010 ThirdGen.org. All rights reserved. No part of this website may be reproduced without the expressed, documented, and written consent of ThirdGen.org's Administrators.