04-09-2002, 04:49 PM
|
#1 |
| Senior Member
Join Date: Oct 2001 Location: Lancaster, CA.
Posts: 642
Car: '92 Camaro RS Engine: 355 TPI Transmission: Tremec T-56 Axle/Gears: 10 bolt/3.42 | Z28 springs
| Can someone please tell me if the stock springs on the 92 Z28's are stiffer than the stock springs on the '92 RS? If the springs for the Z's are stiffer, can I install them on my RS and will it give the my RS a lower stance than the stock RS springs? After replacing the worn out springs with a set of stock RS replacement springs a few months ago, it seems like the RS sits much higher than before. I dont want to lower the car 1 1/2 inches but if the Z28 springs will make my car sit just a little lower than stock height then I think that I would like a set for my RS. | | |
__________________  - 1992 CAMARO RS 305 TBI, 700R4, T-TOPS
- Mods:
- 355 TPI, Tremec 6 spd (T-56), McLeod clutch, Trick Flow Heads, Edelbrock Intake Manifold, AS&M LTRs, ZZ9 Cam, Comp Cams 1.6 Rockers, Holley 52mm Throttle Body, Dyno Don's 1 3/4 Coated Headers, Flowmaster 3" cat-back, Auburn Posi, Richmond 3.42 Gears, PSC Front End Rebuild Kit, KYB Shocks & Struts, Kenny Brown SFC's, Edelbrock STB, TDS Wonder Bar, BMR Torque Arm, BMR LCA's, BMR LCA Relocation Brackets, BMR Ajustable Panhard Rod, Pro 5.0 Shifter, Eibach Pro Kit, 17 X 8 Polished IROC Wheels, 255/45/17 Nitto NT 555
- SC3G Member
|
 
|  |
