going to the track who wants to take a shot at et - Third Generation F-Body Message Boards

c4boom · 04-19-2004, 10:17 PM

just for sh*ts and grins i am going to go run my truck at new england dragway this friday what you guys think it will run

i have a comp cams extreme energy cam grind # xe249h-12 this cam has 206 212 duration at .05 lift (I/E) and .434 and .444 inches (I/E) of lift. i also have edelbrock TES headers, a holey projection intake, holley tbi unit part# 502-6 with the 65 pph injectors and 3 " exhaust to the muffler (flow master 50 series) and then duel 2 1/2 out the back and last and least the crappy stock swirl port heads i have 4.11' s but i am runing a 33" tall tire so that would be like a third gen with 3.23's o and a 700 r4 with stock stall

going to try and unload every thing and try to get it down to 5000 pounds

ShiftyCapone · 04-19-2004, 10:35 PM

Sorry got to lock this. I will allow TBI posts if they are from another vehicle because many people use TBI motors from other GM cars. However, we cannot discuss anything non technical or swap related if they are not involved with a f-body.