08-21-2004, 09:45 PM
|
#1 |
| Member
Join Date: Jul 2001 Location: Ottawa, Ontario
Posts: 400
| tbi spacer question..
I have a 1" SPACER. it came with some spacers for the throttle /tv cable braket. problem is the rear part of the bracket doesn't end up straight with the tb so I had to cut the hole open in the bracket so I could turn it straight. I had to cut a washer in half to make up the other side so the bolt could be tightened. problem is I don't think it stays torqued properly.
can I buy a threaded rod and use red locktite with a nut on it
thread that in to the intake and leave the other threaded end sticking up to hold the bracket? while red locktite hold up to 25ft lbs of torque? | | |
__________________ 
'88 C1500 350 TBI
Belltech 2/4 Drop,
Nitro Drop Shocks,
3.73 Rear gear ratio,
Edelbrock performer TBI intake, performer cam, Performer Heads, 1" TBI Spacer, TCI 2400 STALL LOCKUP TORQUE, Edelbrock Custom Chip, MSD 6A, MSD Blaster coil, k&n 14x4, 3" cut out in front of cat, Hiflow cat with Rhino dual 2 1/2" out the rear. American Racing Neptune 16x8 wheels with Kumho 712's, 255-50 series |
 
|  |
