Just wondering if the elite series air cleaner will fit without any problems? I have the edelbrock valve covers, and want it to match. Also, will a 3" element clear ok? Thanks. ------------------ 89'Camaro Convertible,96'firebird wheels,79'Z28 hood scoop, Dark yellow green paint from Bonnevilles, tan Mr. Mikes leather interior,Macewen white face gauges. Dreaming of a RamJet 350, 2nd place is always the first loser!

the first 2 open elements I got were edelbrocks. They were drop bases = waste of money. Get a flat based edelbrock open element if they make one. The 2 I got were from Pep Boys. Or if Edelbrock doesn't have one, get a Mr. Gasket one too and just use its flat base.

------------------
-Tas
'89 Formula WS-6
[soon to have Hooker 1-5/8" 50 state legal headers installed]

305, TBI, auto, 14x3 chrome flat based open element with K&N, Milodon 160* thermo, functional Formula hood, cross-flow Flowmaster, '99z28 rear pipes and tips....

Super GRK_Taz World
EFI & Intake Options
AOL IM: superGRtaz

Not sure about edelbrocks but the summit ones will not clear the distributor. I had to buy an half inch spacer to make everything clear ok. Oh and A 14X3 element will fit. Even with the spacer

I have the Elite series triangular one, it fits perfectly if you remove the spacer ring. It's pretty much a flat base, clears everything real well, and looks bad as hell.

Thanks guys. I have it on order from jegs today. I will get a flat base bottom if it has a drop base. Thanks for the help.



------------------
89'Camaro Convertible,96'firebird wheels,79'Z28 hood scoop, Dark yellow green paint from Bonnevilles, tan Mr. Mikes leather interior,Macewen white face gauges.
Dreaming of a RamJet 350,


2nd place is always the first loser!