TBIThrottle Body Injection discussion and questions. L03/CFI tech and other performance enhancements.
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
Hey guy's i was wondering if any one runs a set up or knows of a set up for a 305 tbi just using bolt-ons and nitrous to get in the 13's or 12's. Without building the motor or would Like 150 shot and bolt-ons would that do it.
Hey guy's i was wondering if any one runs a set up or knows of a set up for a 305 tbi just using bolt-ons and nitrous to get in the 13's or 12's. Without building the motor or would Like 150 shot and bolt-ons would that do it.
Depends what your definition of bolt-on is. 13's are possible with heads, cam, intake, exhaust and tuning (most consider these bolt-on). I recently ran a 14.039 with these mods and a stock bottom end. 13's are definitly withing reach for my combo.
In old post one guy head bolt ons a 150 shot he went 8.03 in the 1/8 and somewhere near the 12.50 range is where he should be in the 1/4 when I say bolt ons thats headers intake roller rocker open element and gears he had 4.10s so thats almost a second off the 1.4 there.
__________________ 305 tbi 1.6 roller rockers, ultimate tbi with tbi and injector spacers, underdrive pullies, full exhaust, open element, brian harris chip, and 3.42s
yea after driving it my friends dad did something to the remanufactured block. The car is really quick it rapes my friends 305 and i cant ask him what he did to the motor becuase he's in iraq i still dont know what block it is lol.
[quote=adm030;4232242]Nope not yet but I've ran against alot aof people that have I'm thinking at best high 14's mid 14's if I ever get around to changing my gears.
14.2 honda civic with b18 swap, 4.8 truck running a 15.6 before tune was dialed in, just other cars I've been smoked by a supercharged 02 mustang gt, other camaros etc. The 350 is the way to go irish hockey what are the specs on your motor?
yea after driving it my friends dad did something to the remanufactured block. The car is really quick it rapes my friends 305 and i cant ask him what he did to the motor becuase he's in iraq i still dont know what block it is lol.
I should have just taken a loan or sold a kidney.. something to pay for it at the time..
14.2 honda civic with b18 swap, 4.8 truck running a 15.6 before tune was dialed in, just other cars I've been smoked by a supercharged 02 mustang gt, other camaros etc. The 350 is the way to go irish hockey what are the specs on your motor?[/quote]
just a mild 350 modeled after the zz4 crate. comp cam, vortec heads & intake, full exhaust, etc. full bolt on rebuilt motor.
not bad i plan on 100 or 150 shot ,full exhuast,and shift kit
As my car sits now it should be knocking on 13's door. With My EBL datalog even with tire spin it puts me at 13.5 at 105. I heard it was fairly accurate in times but the MPH's can be off a bit.My car is as "bolt-on" as it gets but my car is also completely gutted. (2860lbs). All this on a roughed in tune.
__________________
The ZZ5.0 is in full effect!!!
Check out my Cardomain!!! The Future Ultimate source for TBI performance. http://www.cardomain.com/ride/3869220
305 tbi 1.6 roller rockers, ultimate tbi with tbi and injector spacers, underdrive pullies, full exhaust, open element, brian harris chip, and 3.42s
lol 
and glue 400 pieces of foam
and un packing 1000 single pin's
