08-27-2009, 04:20 PM
|
#1 |
| Member
Join Date: Mar 2004 Location: Washington, Iowa
Posts: 101
Car: 86 T/A, 86 z28, 79 berlinetta, 69 chevelle (totally rusted) Engine: 350's in the f-bodys. 327 in the works for the T/A, MIGHT go with a 383, none in the chevelle Transmission: T/A has a 5-speed, z28 has a 700-r4, th-350 in the 79' (5 or 6-speed soon), and none in the chevelle | already searched, simple tbi intake question
I've spent 45 minutes searching now and haven't found anything but info aobut vortecs, and tbi and porting mods.
All I need to know is can I grind out a tbi intakes center bolts to go on OLDER style heads. I know this can be done on old intakes for newer heads, but i wasn't sure if there would be enough room to get teh bolts into the intake at a different angle...IIRC that was the whole reason they changed the angle, those bolts suck on a spreadbore carb intake and the TBI intakes center area actually looks closer to the outer bolts. | | | |
 
|  |
