TBIThrottle Body Injection discussion and questions. L03/CFI tech and other performance enhancements.
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
Where exactly is the air silencer ring...i removed the ring that is under the air filter itself but is wasn't welded on or anything, is this the right "ring" its about 5 inches wide
__________________ Dan - ASE certified-A1, A4, A5, A8 This is for all things four wheeled and fast...
95 S10 ecsb-350ci, Ported 906 vortec's, L31 intake, 9.5:1, Crane(.484/.512 216/228 112LSA), Hooker Super comps, 2.5" ORY, E-cutout, 40 series flow, 4L60E, 8.8 f*rd posi w/ 3.73's, 7427 PCM, MPFI mode, $OD, WB02. - Daily Driven!
Where exactly is the air silencer ring...i removed the ring that is under the air filter itself but is wasn't welded on or anything, is this the right "ring" its about 5 inches wide
This is the silencer ring, to remove. Of course if you can fab a base to get rid of the pacer ring and allow a little more air from the side to enter the tb, thats a good idea.
Where exactly is the air silencer ring...i removed the ring that is under the air filter itself but is wasn't welded on or anything, is this the right "ring" its about 5 inches wide
This photo is the stock air cleaner spacer ring. It is used to raise up the stock "drop base" to clear the TBI injectors, you can not use the stock air cleaner or any other drop base type of air cleaner w/o this ring. If installing a non-drop open air cleaner you dont need the ring.
Where exactly is the air silencer ring...i removed the ring that is under the air filter itself but is wasn't welded on or anything, is this the right "ring" its about 5 inches wide
This is the "spacer ring" used to lift the stock drop base air cleaner above the injectors. If you go with a non-drop open air cleaner then you don't need this ring.
