TBIThrottle Body Injection discussion and questions. L03/CFI tech and other performance enhancements.
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
My intake started leaking water so I pulled it off, cleaned up stuff, bolted everything back up and it won't start, seems to be getting no fuel and I can't hear the pump running, it fires right off if I pour some gas down the TBI, any thoughts on what I might have left undone or not hooked up properly?
Re: Changed intake gaskets and now no fuel, any tips?
umm interesting. did you leave the injectors unplugged? possibly damaged igniton control module..you used to hear th epump running? kind of odd for it to just go out.
Re: Changed intake gaskets and now no fuel, any tips?
Yes the injector wires are hooked up, although when I went to remove them one of the locking tabs broke off on both injectors, they were hard and brittle, but I don't think the broken locking tabs would prevent them from firing. And yes it ran fine before I shut it down, it was just leaking coolant badly.
Re: Changed intake gaskets and now no fuel, any tips?
When I did a motor swap not too long ago it wouldn't start it took about five minutes or so before I remembered that the injectors weren't plugged in. Definitely worth looking at. ha ha!
