Head choice ?
#1
Senior Member
Thread Starter
Head choice ?
I want to buy new heads and get rid of my TrickFlows. Here's my choices so far:
AFR 210s
Jeg's Aluminum heads
Motown LIte 220s
Edelbrock Victor JRs
Brodix Track 1s
Can anybody recommend anything better that flows great out of the box ? Thanx
AFR 210s
Jeg's Aluminum heads
Motown LIte 220s
Edelbrock Victor JRs
Brodix Track 1s
Can anybody recommend anything better that flows great out of the box ? Thanx
#2
Supreme Member
Join Date: Aug 1999
Location: College Station, Tex USA
Posts: 1,443
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89rs
Engine: 400Sb
Transmission: Tremec 3550
they all flow good. Great is a relative term
Track 1s are slightly wider and will cause a set of supercomps to touch on the front crossmember and rear control arm mount passengerside. I know for a fact.
Find out what the chamber sizes are on them and which ones will put you at the compression you want with out cutting.
I am a firm believer in changing parts in sets to get best benefits. You going to change cams and intakes? What rpm are you running in the traps and whats the max you want to turn?
Find out what the chamber sizes are on them and which ones will put you at the compression you want with out cutting.
I am a firm believer in changing parts in sets to get best benefits. You going to change cams and intakes? What rpm are you running in the traps and whats the max you want to turn?
Last edited by jcb999; 08-27-2002 at 07:02 PM.
#3
Supreme Member
Join Date: Aug 1999
Location: College Station, Tex USA
Posts: 1,443
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89rs
Engine: 400Sb
Transmission: Tremec 3550
sounds like a pretty good deal here
http://cgi.ebay.com/ebaymotors/ws/eB...tem=1853313040
Since nobodies bid, I would wait until its closed and send him email and see if he will take 100 lest than his minimum/reserve.
Since nobodies bid, I would wait until its closed and send him email and see if he will take 100 lest than his minimum/reserve.
#4
Supreme Member
Join Date: Sep 2001
Location: MN
Posts: 1,355
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2009 Pontiac G8 GXP
Engine: LS3
Transmission: 6L80E
Axle/Gears: 3.27
Yeah...for the money, the Pro Action 220cc heads.
Here is a link to the website page: http://www.procylinderheads.com/123460020a.asp
I bought mine from: www.competitionproducts.com
They start at $699 bare for a set and I paid $799 for the CNC chamber option. I have just under $1200 into them TOTAL including paying a professional to check and assemble them ($240 charge just for that)
I am putting them on this weekend...
They are a great head for the $$$.
Good luck,
Here is a link to the website page: http://www.procylinderheads.com/123460020a.asp
I bought mine from: www.competitionproducts.com
They start at $699 bare for a set and I paid $799 for the CNC chamber option. I have just under $1200 into them TOTAL including paying a professional to check and assemble them ($240 charge just for that)
I am putting them on this weekend...
They are a great head for the $$$.
Good luck,
Thread
Thread Starter
Forum
Replies
Last Post
92projectcamaro
Engine/Drivetrain/Suspension Parts for Sale
11
01-18-2016 08:00 AM
New2Chevy
Engine/Drivetrain/Suspension Parts for Sale
2
09-28-2015 12:35 AM