Tech / General EngineIs your car making a strange sound or won't start? Thinking of adding power with a new combination? Need other technical information or engine specific advice? Don't see another board for your problem? Post it here!
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
If not, can someone tell me what the stock L98 cam specs are?
Thanks
__________________ Blue 91 5.7 Z28
Upcoming projects --> Polished plenum and runners, Fix Weatherstripping on Driver's side window, Install Megashifter
Completed projects --> Tune up, New paint job (Datona Blue from Nissan 350Z's). New Street/Strip 700R4 tranny and Vigilanti torque converter. ASCD Big Block hood. Replaced fuel injectors and intake gasket, replaced carpet, heater core, airfoil, cut out air boxes, misc restorations
One more thing.. do you guys know what the powerband of this stock cam is? I was reading some posts which said not to go too high on the stall, maybe 300 above what the peak power band is. Then I saw that stock might have a 1600 stall, so then a 2400 stall seems to be very extreme to switch to with the stock cam.
Can you guys make sense of my question? I've got the stock 91 L98 cam, 3.23 posi and 245/50 16inch wheels. What would be a good stall for a daily driver with no real engine mods.
A 2400 stall was recommended to me but I just want to be sure I know what I'm doing before I lay the money down..
