Okay guys, I knew I've seen that 5-pin pigtail at Pep Boys, and since I'm such a nice guy, I went there, and got the info: Manufacturer: Motormite Website: http://www.rbinc.com Phone # (PA Office): 215-997-1800 85-89 5 pin MAF pigtail Part # 85133 Pep Boys Price: $19.95 85-89 3 pin MAF pigtail Part # 85111 Pep Boys Price: $15.95 So, there you go, it does exist! Of course, it's not through Bosch or GM. Have fun! ------------------ -Tom P (Hot rodded 1986 Firebird 2.8l) from http://www.f-body.net/mailbag/3rd/3rd_mailbag.html message boards ---Think your car could be pic of the week? Visit http://www.f-body.net for details!

Holh mother of crap god..my pepboys has a 4 pin connector MAF for "88-90 TPI Camaros"..thank you sooo much. I am gonna order it now

------------------
-Red '88 IROC 5 Speed 305 TPI w/3.08
-Dual Friction Centerforce Clutch
-Accel 300+ Racing Ignition
-Accel 300+ Pro Sleeve Plug Wires
-Accel U-Grove Plugs
-Flowmaster Force II 3 Chamber Cat Back Exhaust
-Hypertech Chip
-Hypertech Airfoil
-Removed, Then Re-installed (out of fear) MAF Screens
-Gutted Air Box
-Best E/T 14.90, 60 ft. 2.17, 1/8th mile 9.61(bald tires, Code's 34,36)
-Best MPH 92.7(bald tires)

TomP,

Nice work! Dorman/MotorMite has many connectors for most domestic vehicles, and they are usually easy to find at parts stores. That's why I gave their part numbers for my article on MAT relocation.

------------------
Later,
Vader
------------------
"Make Me Bad"
Adobe Acrobat Reader 4.0

I just solved a mystery of the world! That part you gave me is NOT for 305 TPI..it was a 5 pin for a 2.8..it works though!! Weird weird weird..it is exactly the part I needed..I am going to go to the Gm dealer with this part and tell them they are wrong and say they need to retrain their mechanics and do free work for me. Not really..but thanks again..it was 21 bucks though..damned expensive connector!!

------------------
-Red '88 IROC 5 Speed 305 TPI w/3.08
-Dual Friction Centerforce Clutch
-Accel 300+ Racing Ignition
-Accel 300+ Pro Sleeve Plug Wires
-Accel U-Grove Plugs
-Flowmaster Force II 3 Chamber Cat Back Exhaust
-Hypertech Chip
-Hypertech Airfoil
-Removed, Then Re-installed (out of fear) MAF Screens
-Gutted Air Box
-Best E/T 14.90, 60 ft. 2.17, 1/8th mile 9.61(bald tires, Code's 34,36)
-Best MPH 92.7(bald tires)

Hey, glad it worked out for you!! Where did you find that out (that it's for the 2.8)? The Motormite catalog didn't list engines next to their part #'s; all they had under "Camaro" (and "Firebird") was "85-89 MAF".

[edit] In actuality the 2.8's on Camaros & Firebirds used the 3-pin MAF connector... the 2.8's on front wheel drive cars were using the 5-pin Bosch MAF's.

------------------
-Tom P (Hot rodded 1986 Firebird 2.8l) from http://www.f-body.net/mailbag/3rd/3rd_mailbag.html message boards
---Think your car could be pic of the week? Visit http://www.f-body.net for details!

[This message has been edited by TomP (edited November 08, 2000).]

*Primary Engine application GM vehicles with 2.8L engine 1989-85.
*Use CONDUCT TITE! solder filled butt connectors 85270, 85271, 85272 or 85273 for the best connection.
*Application coverage may be greater than shown on package. Consult application guide guide for detailed information.

That is what is on the back of the box I have.


------------------
-Red '88 IROC 5 Speed 305 TPI w/3.08
-Dual Friction Centerforce Clutch
-Accel 300+ Racing Ignition
-Accel 300+ Pro Sleeve Plug Wires
-Accel U-Grove Plugs
-Flowmaster Force II 3 Chamber Cat Back Exhaust
-Hypertech Chip
-Hypertech Airfoil
-Removed, Then Re-installed (out of fear) MAF Screens
-Gutted Air Box
-Best E/T 14.90, 60 ft. 2.17, 1/8th mile 9.61(bald tires, Code's 34,36)
-Best MPH 92.7(bald tires)