SBC 400 with a "MILODON DIAMOND STRIPPER" WINDAGE TRAY - Third Generation F-Body Message Boards

		Third Generation F-Body Message Boards > Tech Boards > Tech / General Engine
SBC 400 with a "MILODON DIAMOND STRIPPER" WINDAGE TRAY

Register

Forgot Password?

Tech / General Engine Is your car making a strange sound or won't start? Thinking of adding power with a new combination? Need other technical information or engine specific advice? Don't see another board for your problem? Post it here!

Welcome to ThirdGen.org!

Welcome to ThirdGen.org.

You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!

Thread Tools

Search this Thread

10-13-2003, 09:37 PM

DTL504

Senior Member

Join Date: Apr 2002

Location: Fayetteville, NC

Posts: 1,133

Car: 84 Z28 Convertible 2 Seater

Engine: Dart Little-M SBC 400

Transmission: Pro-built Automatics 700R4

Axle/Gears: Strange Engineering 3:73

Classifieds Rating: (1)

SBC 400 with a "MILODON DIAMOND STRIPPER" WINDAGE TRAY

I have a SBC 400 with a "MILODON DIAMOND STRIPPER" WINDAGE TRAY. I read that it needed a little messaging to get it to fit a SBC 400 with enlarging the studs holes. Now the problem that I have is my ARP Studs designed for windage tray only have 5 long studs on main cap 3, 4, and 5 (rear main cap). The Diamond Stripper tray has 7 holes. Will it be feasible to mismatch the Milodon Studs kit with the ARP Studs?

Next Situation
The Windage tray end that is suppose to mount to the Stud on the Rear Main Oil Pump Cap is centered over the oil pump stud. Has anyone using this windage tray on a 400 drill a hole to match the stud on the main cap or used the oil pump stud to mount the tray. If anyone have any pictures of this modification on a SBC 400 please post or provide a link.

Thanks: David

Last edited by DTL504; 10-13-2003 at 09:55 PM.

10-13-2003, 09:37 PM

ThirdGen

1992 Camaro

Paid Advertisement

		Third Generation F-Body Message Boards > Tech Boards > Tech / General Engine
SBC 400 with a "MILODON DIAMOND STRIPPER" WINDAGE TRAY

« sb400ci or bb400ci? Whos right? | Running Rich (code 45), fixed but still having problems »

Tags

400, arp, diamond, fod, install, installation, installing, milodon, needed, sbc, sdc, stripper, studs, tray, windage

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are Off Refbacks are Off

1982 Camaro '82 || 1983 Camaro '83 || 1984 Camaro '84 || 1985 Camaro '85 || 1986 Camaro '86 || 1987 Camaro '87 || 1988 Camaro '88 || 1989 Camaro '89 || 1990 Camaro '90 || 1991 Camaro '91 || 1992 Camaro '92

All times are GMT -5. The time now is 02:17 AM.