Tech / General Engine Is your car making a strange sound or won't start? Thinking of adding power with a new combination? Need other technical information or engine specific advice? Don't see another board for your problem? Post it here!

Water for coolant

Thread Tools
 
Search this Thread
 
Old 01-17-2004, 03:32 AM
  #1  
Member
Thread Starter
 
Wezzeles's Avatar
 
Join Date: Sep 2002
Location: Princeton, NJ
Posts: 108
Likes: 0
Received 0 Likes on 0 Posts
Car: Camaro
Engine: L03
Water for coolant

im thinking about running water and some redline water wetter in the spring. no coolant. comments? things i should know?
Old 01-17-2004, 04:57 AM
  #2  
Moderator

 
Vader's Avatar
 
Join Date: Jan 2000
Posts: 19,349
Received 216 Likes on 177 Posts
From what I can determine, Red Line wateer wetter has no properties other than improving the heat transfer of coolant.

You should still have something in your coolant as a corrosion protection, and to help lubricate the water pump seal. As I recall, for standard PEG antifreeze solutions, the minimum recommended concentration is something around 12-18% to ensure that protection.
Old 01-17-2004, 10:42 AM
  #3  
Supreme Member

iTrader: (3)
 
305sbc's Avatar
 
Join Date: Nov 2001
Location: Fairview Heights Illinois
Posts: 2,426
Received 1 Like on 1 Post
Car: 1986 Irocz
Engine: 305 TPI
Transmission: 700R4
Axle/Gears: 3.25:1
Re: Water for coolant

Originally posted by Wezzeles
im thinking about running water and some redline water wetter in the spring. no coolant. comments? things i should know?
Yeah water works great. Distilled (not spring water) will work better with less corrosion.
Old 01-17-2004, 10:44 AM
  #4  
Supreme Member

 
SOLID LIFTER's Avatar
 
Join Date: Apr 2002
Location: HAUNTING THE CHAPEL
Posts: 1,083
Likes: 0
Received 0 Likes on 0 Posts
Car: '87 Mustang LX
Engine: 5.0
Transmission: T-5
Re: Re: Water for coolant

Originally posted by 305sbc
Yeah water works great. Distilled (not spring water) will work better with less corrosion.
Like he said.
Don't use any old tap water.
Old 01-18-2004, 01:10 AM
  #5  
Supreme Member

 
Red Devil's Avatar
 
Join Date: Apr 2000
Location: E.B.F. TN
Posts: 3,187
Likes: 0
Received 0 Likes on 0 Posts
Car: Tree Huggers
Engine: Do Not
Transmission: Appreciate Me.
RLWW actually does have some corrosion inhibitors and they work quite well, however think of the amount of RLWW as compared to your coolant system volume. If it were me... well 60/40 (DW/AF) is what I run.
Old 01-18-2004, 01:32 AM
  #6  
Supreme Member

 
Gumby's Avatar
 
Join Date: Oct 2001
Location: NWOhioToledoArea
Posts: 8,113
Likes: 0
Received 5 Likes on 5 Posts
Car: 86-FireBird
Engine: -MPFI
Transmission: T5
Axle/Gears: 3:42
Water just seams to work the best as long as you can remember to coolant up the mix when it gets colder.

A few times in my life I had a hot car that would puke coolant but be happy as heck with tap water when it was a screaming hot summer. I also delievered pizza then. stop,go,stop,go.......
Old 01-18-2004, 01:35 AM
  #7  
Supreme Member

 
Gumby's Avatar
 
Join Date: Oct 2001
Location: NWOhioToledoArea
Posts: 8,113
Likes: 0
Received 5 Likes on 5 Posts
Car: 86-FireBird
Engine: -MPFI
Transmission: T5
Axle/Gears: 3:42
Ohh and why not just dump a quart of water solvable oil in it???

I often wondered about that when even after a good flush the system looked rusty. Run some oil through it and lube the block.
Old 01-18-2004, 10:23 AM
  #8  
Moderator

 
Vader's Avatar
 
Join Date: Jan 2000
Posts: 19,349
Received 216 Likes on 177 Posts
Originally posted by Red Devil
RLWW actually does have some corrosion inhibitors and they work quite well, however think of the amount of RLWW as compared to your coolant system volume. If it were me... well 60/40 (DW/AF) is what I run.
I guess I've never analyzed the Red Line content label that closely, and in poking around my inventory, it appears that I need to resupply before the spring maintenance cycle. I also have a quart bottle of Prestone corrosion inhibitor/water pump lube (which is probably just a soluble oil or wax) that might satisfy your needs.

BTW - Good to see you're still lurking about. You were stuck on '666' for quite a while.
Old 01-18-2004, 12:53 PM
  #9  
Supreme Member

 
Red Devil's Avatar
 
Join Date: Apr 2000
Location: E.B.F. TN
Posts: 3,187
Likes: 0
Received 0 Likes on 0 Posts
Car: Tree Huggers
Engine: Do Not
Transmission: Appreciate Me.
Originally posted by Vader
BTW - Good to see you're still lurking about. You were stuck on '666' for quite a while.
Well, been busy at a new firm, and I kinda liked the '666' maybe Dirk will p/u and lock it back there eh?
Old 01-24-2004, 08:09 PM
  #10  
Member

 
Larry's Avatar
 
Join Date: Sep 1999
Location: San Antonio, Tx
Posts: 199
Received 7 Likes on 7 Posts
Car: 86 Corvette
I read that Redline water wetter was developed by an engineer that was trying to make a corrosion inhibitor for race cars because some circle tracks don't allow antifreeze. The heat transfer improvement was unexpected. I use 20% antifreeze and water wetter in my TPI S-10 and the temperature on a hot day now runs 180 instead of 200+. I add more antifreeze in the fall and flush the radiator every spring.
Old 05-09-2014, 09:38 AM
  #11  
Junior Member
 
Gary Dan's Avatar
 
Join Date: Sep 2012
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
Re: Water for coolant

I have a 1988 Camaro convertible,,(305 v8),,, put on a daytona hood for better air flow & use wetter water and this seems to solve my overheating at this time. However summer is not in full bloom yet.
Old 05-09-2014, 09:51 AM
  #12  
Supreme Member

iTrader: (2)
 
RedLeader289's Avatar
 
Join Date: Oct 2013
Location: Louisville, KY
Posts: 2,482
Received 105 Likes on 86 Posts
Car: 1983 Z28
Engine: 385 Fastburn
Transmission: T-5
Axle/Gears: BorgWarner 9-bolt posi, 3.27 gears
Re: Water for coolant

Hello 10-year old thread, lol.

Gary Dan, if you look at the top left corner of the last post on a thread it will tell you when it was posted, chances are the original poster on this one hasn't been on in years.

just a friendly heads up
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
sheachopper
Cooling
11
07-31-2019 11:27 AM
ULTM8Z
DIY PROM
12
10-02-2015 01:25 PM



Quick Reply: Water for coolant



All times are GMT -5. The time now is 11:47 AM.