Search



Go Back   Third Generation F-Body Message Boards > Tech Boards > Tech / General Engine
Register Forgot Password?

Tech / General Engine Is your car making a strange sound or won't start? Thinking of adding power with a new combination? Need other technical information or engine specific advice? Don't see another board for your problem? Post it here!
Sponsored by Weld Racing
Click Here

Welcome to ThirdGen.org!
Welcome to ThirdGen.org.

You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!


Reply
 
Thread Tools Search this Thread
Old 06-24-2004, 03:30 PM   #1
Senior Member
 
erictheviking's Avatar
 
Join Date: May 2002
Location: Gloucester,England,UK
Posts: 673
Car: '92 RS Camaro
Engine: 406ci D1SC SBC
Transmission: TH400
Axle/Gears: 9" W/Truetrac

Classifieds Rating: (0)

4" stroke crank with 5.7" rods?

Hi,
I've got a 400ci block with a 4" stroke crank and 6" rods.Can these rods be substituted for 5.7" rods without any problems.I know this sounds bizarre but I could do with knowing.
Many thanks.
__________________
92 RS Camaro

DART 400CI BLOCK,Callies crank, Oliver rods, JE pistons,AFR 210cc heads, Procharger D1SC.Moser 9" w/truetrac.TH400.
erictheviking is offline vBGarage Page   Reply With Quote
Old 06-24-2004, 03:40 PM   #2
Supreme Member
 
Join Date: Jul 1999
Location: Loveland, OH, US
Posts: 18,457
Car: 4
Engine: 6
Transmission: 5

Classifieds Rating: (0)
Depends on the crank and rods.

Part #s would help.

You'd have to change pistons for sure.
__________________
"So many Mustangs, so little time..."
RB83L69 is offline vBGarage Page   Reply With Quote
Old 06-24-2004, 04:04 PM   #3
Senior Member
 
erictheviking's Avatar
 
Join Date: May 2002
Location: Gloucester,England,UK
Posts: 673
Car: '92 RS Camaro
Engine: 406ci D1SC SBC
Transmission: TH400
Axle/Gears: 9" W/Truetrac

Classifieds Rating: (0)

Well it goes like this.I got the crank an Eagle part no. 440040006000.The rods are Eagle 6" rods.Basically I scored some JE pistons very cheap.They are for 4" stroke crank and 5.7 rods.I was thinking I would just have to change the rods and sell the 6" ones to a mate.I then saw an Ebay ad for the same crank and it said for 6" rods only!I don't want to get another crank but I could do with some ideas.BTW the 5.7" rods can be from any manufacturer.
__________________
92 RS Camaro

DART 400CI BLOCK,Callies crank, Oliver rods, JE pistons,AFR 210cc heads, Procharger D1SC.Moser 9" w/truetrac.TH400.
erictheviking is offline vBGarage Page   Reply With Quote
Old 06-24-2004, 04:20 PM   #4
Supreme Member
 
Join Date: Jul 1999
Location: Loveland, OH, US
Posts: 18,457
Car: 4
Engine: 6
Transmission: 5

Classifieds Rating: (0)
The reason the rods matter, is because the crank's balancing is different.

The reason that crank requires 6" rods, is because the counterweights on it won't fit under the pistons when the pistons come to BDC, with rods that are any shorter.

So, with that particular crank, I don't think you can change to the shorter rods.

You can call or write Eagle; they're in the 662 area code, I don't recall which town, it's either Southaven or Horn Lake, it's been a while since I drove by there. If you call, see if a guy named Brian is there, and remembers a silver 83 Z28 with a 400 on the chassis dyno. I don't know their web address, what I thought it was seems to have vanished again.
__________________
"So many Mustangs, so little time..."
RB83L69 is offline vBGarage Page   Reply With Quote
Old 06-24-2004, 05:03 PM   #5
Senior Member
 
erictheviking's Avatar
 
Join Date: May 2002
Location: Gloucester,England,UK
Posts: 673
Car: '92 RS Camaro
Engine: 406ci D1SC SBC
Transmission: TH400
Axle/Gears: 9" W/Truetrac

Classifieds Rating: (0)

I understand,so possibly a crank from a different manufacturer may work,I'll just have to do some homework.BTW the Eagle crank is internally balanced unlike a standard 400 crank,is this the main problem your highlighting?
__________________
92 RS Camaro

DART 400CI BLOCK,Callies crank, Oliver rods, JE pistons,AFR 210cc heads, Procharger D1SC.Moser 9" w/truetrac.TH400.
erictheviking is offline vBGarage Page   Reply With Quote
Old 06-24-2004, 05:10 PM   #6
TGO Supporter
 
Stekman's Avatar
 
Join Date: Jul 2003
Location: Grand Rapids, MI
Posts: 4,803
Car: Z28
Engine: Sb2.2 406
Transmission: Jerico 4 speed
Axle/Gears: Ford 9" 3.60

Classifieds Rating: (0)
Send a message via AIM to Stekman Send a message via MSN to Stekman
Why don't you just get the correct pistons and call it a day? I don't see the logic in replacing the rods and the crank, just to use a set of pistons, JE or otherwise. Just doesn't make sense to me.
Stekman is offline vBGarage Page   Reply With Quote
Old 06-24-2004, 05:16 PM   #7
Senior Member
 
erictheviking's Avatar
 
Join Date: May 2002
Location: Gloucester,England,UK
Posts: 673
Car: '92 RS Camaro
Engine: 406ci D1SC SBC
Transmission: TH400
Axle/Gears: 9" W/Truetrac

Classifieds Rating: (0)

I'm afraid the "correct pistons" for my application are going to be custom items.Considering where I live these pistons are going to cost me the equivelant of $1600.I can shift the crank and rods and get most of my money back,can you see where I'm coming from now?
__________________
92 RS Camaro

DART 400CI BLOCK,Callies crank, Oliver rods, JE pistons,AFR 210cc heads, Procharger D1SC.Moser 9" w/truetrac.TH400.
erictheviking is offline vBGarage Page   Reply With Quote
Old 06-24-2004, 06:02 PM   #8
Supreme Member
 
Join Date: Jul 1999
Location: Loveland, OH, US
Posts: 18,457
Car: 4
Engine: 6
Transmission: 5

Classifieds Rating: (0)
The problem I am highlighting, is the one that requires that the stock 400 be externally balanced in the first place. There isn't enough space under the pistons at BDC to fit a large enough counterweight to do the job.
__________________
"So many Mustangs, so little time..."
RB83L69 is offline vBGarage Page   Reply With Quote
Old 06-24-2004, 06:02 PM
ThirdGen
1992 Camaro




Paid Advertisement


Reply

Go Back   Third Generation F-Body Message Boards > Tech Boards > Tech / General Engine

Tags
200, 4, 40, 400, 57, ci, crank, oliver, rods, rpds, sale, sbc, stroke, stroked
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

 


1982 Camaro '82 || 1983 Camaro '83 || 1984 Camaro '84 || 1985 Camaro '85 || 1986 Camaro '86 || 1987 Camaro '87 || 1988 Camaro '88 || 1989 Camaro '89 || 1990 Camaro '90 || 1991 Camaro '91 || 1992 Camaro '92


All times are GMT -5. The time now is 06:26 AM.


Powered by vBulletin® Version 3.7.5
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
All content copyright 1997 - 2014 ThirdGen.org. All rights reserved. No part of this website may be reproduced without the expressed, documented, and written consent of ThirdGen.org's Administrators.

Emails & Contact Details