Tech / General EngineWhy is my car making that sound? My car won't start! Combination questions? Don't see a board for your problem or have other technical or engine specific questions? Post them here!
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
I just noticed that my balancer wobbles but the crank pulley doesn’t. I've put the balancer installer tool to it and it still wobbles. This isn’t normal is it?
This ad is not displayed to registered members. Register your free account today and become a member on ThirdGen!
__________________ K&N,Air Foil,Split Fire,MSD 8.5 Super Conductor Wires ,Throttle Body Bypass,160 Thermostat,Manual Fan Switch,Flowtech Headers,Flowtech Cut Out,Flowmaster 80 Series Muffler,Dynomax High Flow Cat,Flat Top Pistons,CraneCams 2032,Crane Cams Lifters, Crane Cams Pushrods,Crane Cams Valve Springs,Comp Cams Pro Magnum 1.52 Roller Tip Rockers,Cloyes True Roller Timing Chain,Holley AFPR,Port&Polish Heads,Walbro 255 High Pressure Fuel Pump,Auotmeter Fuel Pressure Gauge,ProForm Mini Starter, Energy Suspension Trans Mount and Torque Arm Bushing www.Club502.cjb.net
Sponsored Links
Registered users do not see this ad. Click here to register for free!
The belt sheaves are bolted to the crank hub. The harmonic balancer is mounted on a rubber/elastomer ring around the crank hub. It sounds like your's is about to let go. Time to start shopping for a replacement.
