Tech / General EngineIs your car making a strange sound or won't start? Thinking of adding power with a new combination? Need other technical information or engine specific advice? Don't see another board for your problem? Post it here!
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
I am running a CompuCam 2032 cam in my Pontiac L98 and I am not getting that much better horsepower difference from the original roller cam. Has anyone else had better luck with this cam. Look at signature below for additions I have made with cam. I am thinking about swapping cams for something larger maybe????? I was looking for about 400HP and more torque but it does not feel that way at all.
There are literally dozens out there that would work nicely. If you plan to keep the stock long runner setup (not convert to a miniram or anything down the road) then I say go with the LT4 HOT cam.
Its 218/228 duration at 0.050", and .492/.492 lift with 1.5 rockers, .525/.525 lift with 1.6 rockers, 112 LSA. Looks like its $175 from Scoggin-Dickey. Pretty good deal if you ask me.
bsa
