Tech / General EngineIs your car making a strange sound or won't start? Thinking of adding power with a new combination? Need other technical information or engine specific advice? Don't see another board for your problem? Post it here!
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
i have a ccc q-jet on my 305 with the ecm and when your behind the car your eyes water, i installed a heated o2 sensor and that did not fix the problem, i checked the coolant temp sensor also, everytime i drive this car i personally stink like it after i get out of it and come in the house, it's pissing me off, i dont think the lg4 computer has the field service mode, i'm out of ideas, oh yeah i checked the tps sensor and thats good also
__________________ 1986 Camaro 305 TPI Conversion, Accel Base / Runners / AFPR, Holley 52mm TB, FMS 42# Injectors, 7749 with $59 3-bar map, WP 305 S/R Torquer Heads, Crane Powermax 2032 Roller cam, CompCams 1.6 Magnum Roller Rockers, Hedman Coated Headers, Edelbrock Cat-Back, Tremec TKO-600 with CF DF Clutch, Lakewood Scattershield, Moser 12 Bolt 3.73 Posi rear, Spohn LCA's & Relocation brackets, Lakewood adj panhard. 36/24 Swaybars, Spohn Subframe Connectors, Spohn TKO Crossmember with DS Loop, Spohn Steel Driveshaft, Hotchkis Strut Brace, Eibach Pro-Kit, Tokico Illumina Struts and Shocks, Procharger D1SC 12#'s, LS1 Brakes Front, Wilwood Pro Series Rear. 381HP/400FT/LB's on 10#'s of boost
