Tech / General EngineIs your car making a strange sound or won't start? Thinking of adding power with a new combination? Need other technical information or engine specific advice? Don't see another board for your problem? Post it here!
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
I am looking for a website.. I bought a 350 block with a wolverine cam in it but I can't find any info on the net for that cam company
any info guys?
------------------
92 z-28 G92 black with white racing stripes.
Dynomax cat back
Ram air
305 5 speed, underdrive pulleys and TB by pass
http://www.thirdgen.org/rides/rideimages/92_Z.jpg
------------------
92 z-28 G92 black with white racing stripes.
Dynomax cat back
Ram air
305 5 speed, underdrive pulleys and TB by pass
http://www.thirdgen.org/rides/rideimages/92_Z.jpg
crane bought blue racer. But, I don't see a 5051 listed http://www.blueracer.cranecams.com/chevysb.htm
I have a engine shop program that lists a lot more wolverine cams. I will look for a 5051 when I get home.
------------------
92 z-28 G92 black with white racing stripes.
Dynomax cat back
Ram air
305 5 speed, underdrive pulleys and TB by pass
http://www.thirdgen.org/rides/rideimages/92_Z.jpg
Well, .300 lobe lift is .45 at the valve with a 1.5 rocker.. so it not too mild.. good for an ECM combination I think. Maybe add 1.6 rockers to get the lift to about .48
Hello, I was wondering if you could help me out with a Wolverine Blue Racer cam? Its a Roller Cam, WG 5007 MR. Its for a friend of mine, some how he threw the box away, and doesn't have any information on it. If you have the info, he wants everything on it. Thanks.