Im retarded, Can i get a little help plz!
#1
Member
Thread Starter
Join Date: Feb 2004
Location: St. Louis
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
Car: '86 Trans Am
Engine: stout 350
Transmission: automatic
Im retarded, Can i get a little help plz!
Ok so Ive been trying to put my engine back in my car, and I marked all the sensors, but didnt mark any oif the brackets for the accesories on the front of the engine. If anyone has any pictures of the front of a V8 v-belt pulley system, I would be truely greatful becuase this project is taking way to long and I want to drive my car again! Thanks.
#2
Supreme Member
iTrader: (1)
Join Date: Oct 2004
Location: Worcester, MA
Posts: 3,361
Likes: 0
Received 1 Like
on
1 Post
Car: 86 T/A
Engine: HSR 355
Transmission: 700R4
Axle/Gears: 2.77 posi
I'll try to dig a few pictures up, I just went through this, mixing up different and duplicate brackets. Ended up having to grind my power steering pump to make it fit somehow.
#3
Senior Member
Join Date: Feb 2005
Location: Atlanta, GA
Posts: 669
Likes: 0
Received 1 Like
on
1 Post
Car: 1982 - Z28
Engine: 350 / CCC Q-Jet
Transmission: THM-700R4
Axle/Gears: 10 Bolt - 3.73
Does this help?
If this doesn't help let me know what area you need.
The middle section may be the best as it includes the PS bracket.
Sincerely,
Kurt
The middle section may be the best as it includes the PS bracket.
Sincerely,
Kurt
#4
Senior Member
Join Date: Feb 2005
Location: Atlanta, GA
Posts: 669
Likes: 0
Received 1 Like
on
1 Post
Car: 1982 - Z28
Engine: 350 / CCC Q-Jet
Transmission: THM-700R4
Axle/Gears: 10 Bolt - 3.73
A/C Bracket Mod for Headers
If you have headers you'll have to modify the A/C bracket (assuming you have A/C) to make it fit.
My son and I used a spacer and cut the right "Leg" completely off the bracket. I don't believe the integrity of the bracket was effected by the loss of one leg.
Sincerely,
Kurt
My son and I used a spacer and cut the right "Leg" completely off the bracket. I don't believe the integrity of the bracket was effected by the loss of one leg.
Sincerely,
Kurt
#5
Member
Thread Starter
Join Date: Feb 2004
Location: St. Louis
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
Car: '86 Trans Am
Engine: stout 350
Transmission: automatic
ac bracket
I didnt really have to vut oof the half of the bracket, but i had toi grinsd away some of the bracket to ,make it fit.
#6
Member
Thread Starter
Join Date: Feb 2004
Location: St. Louis
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
Car: '86 Trans Am
Engine: stout 350
Transmission: automatic
thanks yall
Thanks for the pictures of the brackets, really helpful. I did have to grind the AC bracket alot, but i managed to fit it without cuting and legs off. If anyone has any pictures of the passenger side brackets, that would make it so much easier! Thanks again
Thread
Thread Starter
Forum
Replies
Last Post
Andrew Prakash
TPI
2
09-08-2015 11:48 AM