Tech / General EngineIs your car making a strange sound or won't start? Thinking of adding power with a new combination? Need other technical information or engine specific advice? Don't see another board for your problem? Post it here!
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
Whats the rest of the engine? TPI? Heads? What cam you have now?
I have one in a 350, I'd imagine it would be a little tamer in a 383 or 396. Springs are going to depend on the heads, but you'll need some fairly stiff springs with lots of available lift space to handle that cam.
My 383 wasn't that bad to tune,
I did have to up the idle though
__________________ '91 GTA - 400sbc,AFR195elim,280 xfi cam,1 5/8 shorty headers and single 4", LT1 intake, 3200 stall, 3.75 gears with a ford 9" and Zex dry nitrous.
