Tech / General EngineIs your car making a strange sound or won't start? Thinking of adding power with a new combination? Need other technical information or engine specific advice? Don't see another board for your problem? Post it here!
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
HELP!! Im about to install 1.6 scorpion RRs on my L98 and would like some suggestions on what tall centerbolt valve covers to go with,anyone know what works best?
Id like new valve covers,not to modify my existing ones.THX!!!
i know moroso makes a nice centerbolt set but theyre like 100+ new, but then again so are any other centerbolt aftermarket covers. just make sure theyre not too tall to interfere with any accessories.
I was thinking of something like this http://cgi.ebay.com/ebaymotors/ws/eB...id=p2761.l1259 But thers no oil cap hole... I guess I could just pull the pvc valve to refill oil after a change? but Id much rather spend the money for really kick *** ones,That will clear wide body roller rockers,last time Id did this I had to cut the covers bolt guides out..Id like to advoid the mods and just have the best parts! I couldnt find the moroso ones got a link? Thx!
I'd get that one you linked from Ebay. AL covers that are tall = perfect.
I thought you might be looking at the Skip White ones, but on Ebay I think they only advertise the perimeter bolt style ones.
Yea, PVC on one side, breather on the other. The breather is just a ~3/4" metal tube pushed into a rubber grommet. Pull it out and add oil - easy.
