Tech / General EngineIs your car making a strange sound or won't start? Thinking of adding power with a new combination? Need other technical information or engine specific advice? Don't see another board for your problem? Post it here!
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
ok i'm looking into getting a t-5 transmission in my 88 hardtop to get me buy for now, but i see everyone asking for the tag numbers , i'm sure has to do with gear ratios and design, put currently mine is a auto and doing the swap, tag number is wg 13-52-072, any info on this would be great. , i have some more work i have to perform before i can throw down a couple grand for a tko. and if this t-5 survives then it will transplanted into my 86 iroc t-top.
sometimes the tag eventually falls off the tranny, your best bet would be to get a T-56 instead of a t-5, believe me from experience, I have a 350 modded pretty good(street) running high 12's (12.97) on motor with a World Class(WC) T-5 and my countershaft broke, and that's without power shifting my T-56 has been on there for a couple of years now and it's still taking the abuse...I found my T-56 for $700.00 at a junkyard......
Erick......
__________________ Eric.... 1986 Transam
355ci motor(92z71) LT-4 Hot Cam package, springs, RockerArms,cam,locks retainers
Modified Vortec Heads, 2.02/1.60valves, screw in studs, guidplates
.600 lift springs, ported & flow benched to 200cc intake runner Edelbrock Air GAp intake Holley 750DP
Headman Headers, 3" exhaust, Flowmaster 80 series
T-56 6-speed, spohn crossmember
et:12.92 @ 109mph (All motor)
i'm currently running a 350 with 350 horse and 385 ftlbs of torque, i've looked all over the place around here and nobody has any t-56's. i just don't want to pop in a t-5 and not be able to drive it to the local gas station without having to worry about not making it back hahaha
I have a T-5 in my 92 RS and it has to be rebuilt but I would hope so with nearly 190k on it and it has never been touched. Even knowing and hearing the bearings I still get up on it and power shift when the servo's aren't telling me no.