New crate engine Flexplate and starter question - Third Generation F-Body Message Boards

THETANK · 07-09-2009, 06:42 PM

The crate engine that I am getting has a 168 tooth Flexplate. I wanted to change the flexplate to a 153 tooth flexplate due to clearance issues with my hedman shorty headers and y pipe. My question is can I just bolt on any 153 tooth flexplate for a 350 with a one piece rear main seal? I am also looking at the powermaster 9600 should that work with this comb(not sure how to tell if its inline or staggered)? If not could you suggest something that would work with this setup

355
1 piece rear main

The crate I am getting is the CT350PC1 from yearone

Atilla the Fun · 07-10-2009, 11:07 AM

you'll get alot more replies if you'll post links to each thing you're considering.

THETANK · 07-10-2009, 11:19 AM

http://www.yearone.com/serverfiles/f...ain2.asp?cat=G

i cann't get it to link directly to the engine PN is : CT350PC1

Flexplate:

http://www.summitracing.com/parts/QTI-RM-932/

OR

http://www.summitracing.com/parts/BMM-20238/

Starter:

http://www.summitracing.com/parts/PWM-9600/

Atilla the Fun · 07-10-2009, 11:26 AM

from the info available, you can use that starter with either flexplate with that engine.