Tech / General EngineIs your car making a strange sound or won't start? Thinking of adding power with a new combination? Need other technical information or engine specific advice? Don't see another board for your problem? Post it here!
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
So I'm in the process of putting my engine back together and I can't find torque specs for everything. As a result when installing the cam plate I broke one of the bolts off. I really don't want to just guess. I guess what i really need is specs for the lifter hold down, cam plate, oil pan, timing cover, heads, intake, and accessories.
any help with this would be greatly appreciated!
__________________ -flowmaster cat back
-eibach pro kit
-T56 swap
- LT1 cam
I'm inside for the night, and my Chiltons manual is outside, is it a 350 or 305? Can I ask, do you have a Chilton's manual, have you considered getting one?
__________________
Its not perfect, but fun and practical. Everything's boxed in, polygraphite bushings, zerks fittings, ported L98 block, heads, intake, plenum. No smog, heat, or ac. No carpet, no interior except for the dash, shifter, and a seat. Shorty headers into a y pipe, to a 3" Powerstick that dumps out before the axle
2004 gm luxo blue paint from ppg/sand blasted rear end, new rotors calipers front/rear/dropzone springs
kyb shocks/strutscontrol arms/trackbar boxed in with 3/16" steel plate./Chassis front to back stitch welded/Brake Ducts/Ram air-cold air from foglight location/De-screened MAF/hvhp oil pump. - no oil starvation yet/Moroso blue race wires/hypertech cap, coil, and rotor, the 55k volt package?/bosch 4 tip iridium plugs/Mobil 1 15-50 Synthetic/ TH350, non lockup with transgo 350-3 full manual kit
Rather than type out all the specs you need, here's a link to the very first site that was listed when I did a google search for 'chevy small block torque specs': http://www.boxwrench.net/specs/chevy_sb.htm
__________________
Its not perfect, but fun and practical. Everything's boxed in, polygraphite bushings, zerks fittings, ported L98 block, heads, intake, plenum. No smog, heat, or ac. No carpet, no interior except for the dash, shifter, and a seat. Shorty headers into a y pipe, to a 3" Powerstick that dumps out before the axle
2004 gm luxo blue paint from ppg/sand blasted rear end, new rotors calipers front/rear/dropzone springs
kyb shocks/strutscontrol arms/trackbar boxed in with 3/16" steel plate./Chassis front to back stitch welded/Brake Ducts/Ram air-cold air from foglight location/De-screened MAF/hvhp oil pump. - no oil starvation yet/Moroso blue race wires/hypertech cap, coil, and rotor, the 55k volt package?/bosch 4 tip iridium plugs/Mobil 1 15-50 Synthetic/ TH350, non lockup with transgo 350-3 full manual kit
wow, for some reason I remember searching for that before and had trouble finding what I was looking for. Plus I was a little tired and frustrated last night. Thanks for the quick replies!
