Tech / General EngineIs your car making a strange sound or won't start? Thinking of adding power with a new combination? Need other technical information or engine specific advice? Don't see another board for your problem? Post it here!
Welcome to ThirdGen.org!
Welcome to ThirdGen.org.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, join the ThirdGen.org community today!
I have a 92 camaro RS with an 89 350 in it it has a custom computer chip, exhaust, intake and TBI work done. about a week ago it started to sound like it was missing it idels rough and shutters and hesitates under acceleration. Since then i have put a new TPS sensor Map sensor fuel filter, and cap and rotor, when i removed the cap and rotor i noticed that the node that fires number 6 was corroded and looked different then the rest so i thought the new cap and rotor would of solved the problem, I ran it for a couple days and it still sounded like it was missing and now the new cap looks the same way on the number 6 node as the old one did. I have tested the pickup coil in the distributor and the remote coil too and both tested ok. I have also been getting an EGR code but it is opening and closing fine so i think something else is triggering the code. I have no idea what else it could be I am stummped any suggestions?
The wires and plugs are new.I put them in when I put the engine in about 6 months ago the wire on 6is good I checked it with an electric meter. But I am going to replace the plugs.
Last edited by 891-92camaro; 11-02-2009 at 06:02 PM.
