| new combo for future build
| starts out with a world products aluminum block will be milled to take a 4 inch crank and a 4.06 bore (gonna have the miller measure the pistons and bore the block appropriatly). going with an eagle pro forged 4340 4 in stroke internally balanced crank with a 2 piece rear seal. 5.7 inch h beam rods topped with ross +4cc flat top pistons. comp cams magnum retrofit hydro roller 286/286, 560/560 with hydro roller lifters. afr 227 eliminator competition ported racing heads fully cnced. crower 1.9 ratio stainless steel rockers (raises lift to 709/709). weinand stealh air strike intake. full roller timing set. and a quick fuel 1050 carb. all parts will be new and measured properly. static compression ratio is 11.19:1 dynamic is 8.67:1 dynamic cranking pressure is 176.38 PSI total ci is 414 | | |
__________________
1987 Trans am. 5.7 bored .060 over, 600 cfm holly carb, edelbrok preformer intake, hooker headers, comp cam dur 262/270 lift 464/470 lobe seperation 114*, 700r4 tranny, stock rear end, ws6 suspension, next mods to come: t56 trans, posi rear end with a 3.73. then the stroker kit. | 
