mesterious

iTrader: (1)

Is the cnc'ed super victor worth the money or worth getting over a non cnc'ed super victor?

five7kid

iTrader: (14)

Depends upon what it is feeding.

mesterious

iTrader: (1)

406 sbc, 210 AFRs, 11.3:1 comp, 255/263 @ .50 solid roller

1989GTATransAm

iTrader: (3)

Sounds like a serious build. I would do a lot of research and make sure the cross sectional area of the CNC version is best for your motor and how the intake manifold matches up to your heads. You may be better off getting the regular intake manifold and have it professionally ported to match your motor and heads.

Having the wrong intake manifold can keep you from making the power you should. It sounds like you have a nice strong build in the making. I know on a regular Super Victor one of the things they do is open up the plenum so that all cylinders get equal feeding from the plenum. You might compare the plenum area of the two.